Question about 2001 KTM Exc-Racing E 520

1 Answer

Cluch was riding home today at an enthusiast pace. when I went to pull on the clutch there was not much resistance! got it home checked if I had enough runny stuff in the rez! all ok by the looks of things. had to go out so took the bike

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

All was good!! any ideas what happened and can I fix it so it doesn't do it again?i think you'll find the crapy standard slave cylinder is about to expireget a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of troubleit has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.,,,

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have just got a 05 cr 125 and when i select a gear withe the cluch pulled in the bike stalls like the cluch is sticking or not operating but can feel resistance in the leaver and can hear it operating...


Hi, sounds like you may have too much free play on your lever, when you pull the clutch it is not disengaging all the way, try taking some free play out, simply turn the adjuster at the lever so when you pull the lever it has resistance after half inch, if is is still the same than wrong oil can also do it, worn clutches is another reason.

Feb 14, 2011 | 2002 Honda CR 125 R

1 Answer

Need to find out the clutch disc spec's for a 03 suzuki orzak 250


the easy way to find out if the cluch is slipping is to ride the bike in top gear pull in the cluch rev the bike up to high revs and drop the cluch if the engine dont drop in revs very fast and the revs only drop slowly its slipping if this happens check that you have a small amount of slack in the cluck cabel ie: 1/4 of an inch is ok if its to tight it will cause the cluch to slip as the engine warms up

Jan 14, 2010 | 2003 Suzuki 250 SB

1 Answer

Cluch


i think you'll find the crapy standard slave cylinder is about to expire,get a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of trouble,it has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.

Nov 10, 2008 | 2004 Vertemati E501

1 Answer

Cluch


all was good!! any ideas what happened and can I fix it so it doesn't do it again?i think you'll find the crapy standard slave cylinder is about to expireget a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of troubleit has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.,,,

Nov 10, 2008 | 2002 KTM LC8 950 Rally

1 Answer

Cluch


all was good!! any ideas what happened and can I fix it so it doesn't do it again?i think you'll find the crapy standard slave cylinder is about to expireget a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of troubleit has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.,,,

Nov 10, 2008 | 2002 KTM LC4 640 Adventure

1 Answer

Cluch


all was good!! any ideas what happened and can I fix it so it doesn't do it again?i think you'll find the crapy standard slave cylinder is about to expireget a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of troubleit has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.,,,

Nov 10, 2008 | 2002 KTM LC 8 Adventure

1 Answer

Cluch


all was good!! any ideas what happened and can I fix it so it doesn't do it again?i think you'll find the crapy standard slave cylinder is about to expireget a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of troubleit has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.,,,

Nov 10, 2008 | 2002 KTM LC 4-E 640 Enduro

1 Answer

Cluch


all was good!! any ideas what happened and can I fix it so it doesn't do it again?i think you'll find the crapy standard slave cylinder is about to expireget a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of troubleit has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.,,,

Nov 10, 2008 | 2005 KTM EXC 525 Racing

1 Answer

Cluch


all was good!! any ideas what happened and can I fix it so it doesn't do it again?i think you'll find the crapy standard slave cylinder is about to expireget a nice billet aluminum one from evoluzione cyclesports in California at evoluzione.net. Iv'e had one on my 990SM since March and have done 5500miles with no hint of troubleit has double '0' rings on the piston,the KTM part only has one which allows the piston to cock-over and leak fluid,just take yours off and have a look. I had 2 fail on my 950SM and 1 on the 990SM,the mineral clutch fluid gets very black from engine heat,changed the fluid several times but never could trust the standard one wasn't gonna let me down.,,,

Nov 10, 2008 | 2000 KTM 640 LC4

Not finding what you are looking for?
2001 KTM Exc-Racing E 520 Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

kevmx2003

Level 2 Expert

86 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...