Question about 2004 Husaberg FC 550

1 Answer

Spark plugs how often should i change my spark plugs?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Change it when the center electrode becomes slightly rounded or if it fouls. Whichever comes first.

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the spark plugs in a


Instructions
  1. Remove the spark plug boot from the spark plug you wish to remove. The spark plug boot is black rubber on the Yamaha Royal Star, located at the top of each cylinder. It is removed by simply pulling the boot straight off of the spark plug. You will hear an audible "pop" when the spark plug boot disengages from the spark plug head.

  2. Insert the spark plug socket onto the spark plug, then the eight inch socket extension, then the socket wrench. Loosen the spark plug by turning the wrench in a counterclockwise motion, being careful not to hit the motorcycle fuel tank with the handle of the socket wrench. The spark plug will stick a little at first, but then will come out easily. Avoid allowing anything to drop into the spark plug hole while the plug is removed.

Apr 29, 2014 | 2004 Yamaha Royal Star Venture

1 Answer

Spark plugs change


generally the procedure is the following:
- stop the engine
- take off any obstructing panels
- disconnect spark plug cables
- using a spark plug wrench, remove the old plugs
- install the new ones (see your manual for what sort of spark plugs you need)
- reconnect the cables
- start your engine
here's a video example of a 2003 honda shadow spark plug change:
http://www.youtube.com/watch?v=t7b1GropyXE

Jan 24, 2014 | 2002 Honda VT 750 CD Shadow A.C.E. Deluxe

1 Answer

My 98 ultra classic is not getting any spark/fire from my coil to my motor. I changed my coil, I tried changing my relays and still nothing. My bike is a '98 Harley Electra Glide Ultra Classic with...


Hi Anonymous, the CKP sensor needs compression to send correct signal to the ICM/ECM, make sure both spark plugs are in heads and use a grounded third plug to check for spark or hold spark plug cable close to spark plug in head. If still not getting spark the usual suspects are:
1. Fouled spark plugs.
2. Battery voltage below 8.7 volts, loose or broken battery cables especially ground cable to frame.
3. Loose connection at ignition coil or plug between ignition sensor and module.
4. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
5. Faulty ignition coil or ignition / electronic module
6. Failed CKP, CMP, MAP or BAS sensor.
7. Faulty ignition switch.
For a prime suspect please visit the website below and good luck.
Harley Check Engine Lamp Diagnostics

Aug 23, 2013 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Yamaha 650 vstar not starting


did you check for spark ?
take the spark plug lead off and remove the spark plug
reconnect the loose spark plug to the spark plug lead - then place the spark plug on the engine and try to start - since you can see the live end of the plug - you should see a it sparking - do not touch the plug with the ignition on - or you will get a good jolt
test all spark plugs - if not here then it is probably a fuel problem

Jan 06, 2013 | Yamaha V Star Classic 650 Motorcycles

1 Answer

93 sportster only fires on 1 side of coil


Hi Lowbrowbob, on twin cams make sure both spark plugs are in heads and use a grounded third plug to check for spark or hold spark plug cable close to spark plug in head. If still not getting spark the usual suspects are:
1. Fouled spark plugs.
2. Battery voltage below 8.7 volts, loose or broken battery cables especially ground cable to frame.
3. Loose connection at ignition coil or plug between ignition sensor and module.
4. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
5. Faulty ignition coil or ignition / electronic module
6. Failed CKP, CMP, MAP or BAS sensor.
7. Faulty ignition switch.
For a prime suspect please visit the website below:
Good luck
Harley Davidson Sportster error codes and how to access them

Oct 06, 2012 | 1993 Harley Davidson XLH Sportster 883...

1 Answer

2003 harley 1200 sportster won't start when warm tuns over no spark just changed coil no difference starts right away when cold


Hi Curtis, the CKP sensor needs compression to send correct signal to the ICM/ECM, make sure both spark plugs are in heads and use a grounded third plug to check for spark or hold spark plug cable close to spark plug in head. If still not getting spark the usual suspects are:
1. Fouled spark plugs.
2. Battery voltage below 8.7 volts, loose or broken battery cables especially ground cable to frame.
3. Loose connection at ignition coil or plug between ignition sensor and module.
4. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
5. Faulty ignition coil or ignition / electronic module
6. Failed CKP, CMP, MAP or BAS sensor.
7. Faulty ignition switch.
8. Security alarm failing to disarm.
For a prime suspect please visit the website below and good luck.
Harley Davidson Sportster error codes and how to access them

May 06, 2012 | 2003 Harley Davidson XL 1200 C Sportster...

1 Answer

How to change spark plug


buy the compatible spark plug ( the size and the model is written on the spark plug) . remove the the cover on the spark plug change it , easy ;-)

Mar 14, 2012 | 2008 Honda CBR 600 RR HANNspree Ten Kate...

1 Answer

How to change spark plugs on a 1998 Honda CBR 600


Remove spark plug cable from top of spark plug and use a socket set to remove spark plug and then place new spark plug and tighten it to required Torque which is specified in Repair manual for your bike

Jun 23, 2010 | 1998 Honda CBR 600 F(3)W

1 Answer

How do i change my spark plugs on suzuki c50 motorcycle


No. 1 (FRONT) SPARK PLUG REMOVAL
• Remove the rear and front seats.
• Remove the fuel tank.
• Remove the right frame cover 1 (remove hooked part)
• Remove the spark plug cap
• Remove the spark plug with a spark plug wrench.
No. 2 (REAR) SPARK PLUG REMOVAL
• Remove the rear and front seats.
• Remove the fuel tank.
• Remove the spark plug cap.
• Remove the spark plug with a spark plug wrench
Hope this help you quest. Good enough?

Apr 18, 2010 | 2005 Suzuki Boulevard C50

3 Answers

2001 yz 426 spark plug


Remove plug then reinsert top cap only let plug hang free now kick over starter wile somone watches the plug for spark (the darker the better!)

Dec 17, 2008 | 2001 Yamaha YZ 426 F

Not finding what you are looking for?
2004 Husaberg FC 550 Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husaberg Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4481 Answers

Bill Boyd

Level 3 Expert

31607 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...