Question about 2008 HM CRE F450XI

1 Answer

Starter just spining

Hello to all and anyone who could help. I have a 1986 CRMF 450XI The bike starts up on the first try most everytime. But after riding for a while and shutting it down

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

I would try to start it again and all I get is a spinning and whining sound from the starter. It is as if the starter is not engaging somehow. A while after it cools down the bike will start agian. Does anyone have any possible answers. Thanks in advance!A lot of the starters are designed so the bendix shaft shears if it sticks to the fly wheel or over torques. If you remove the starter, connect a pair of vice-grips to the bendix gear. Jump the starter with a pair of cables, to get it to activate. The bendix will probably kick out, but not rotate. You should hear the armeture spin. Otherwise, the bendix will kick out, and you'll hear the armeture hum. If that's the case, check to make sure the fly wheel has been ground down, on the side facing the starter. However, you would probably hear grinding not spinning, if that were the problem.,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1986 Honda shadow vt1100c. I was driving and the bike shut off. I have power to the lights, but when I hit the start button the headlight dims and the bike doesnt turn over at all. I put direct...


check selionoid try jumper between battery terminal and starter terminal, if starter respond selionoid is bad. also there may be a 30 amp fuse strip at that location check this also.

May 20, 2014 | 1986 Honda VT 1100 C

1 Answer

Bike wont start. starter will turn over but no spark to plugs.can anyone help?


Check all wiring connections on cdi unit - just follow spark plugs leads back. If all cables are ok then you need to check the cdi unit out. Check that cut out switch is not on, although it should not tunr over, if this was the case

Sep 24, 2013 | 1986 Honda VT 1100 C

1 Answer

My honda shadow vt1100c 1986 wont start because of no spark.starter will kick over but no spark to leads.can anyone help?


Weak battery, starter is taking too much power and nothing left for spark. Also, you have to fill up carburetors with gas if the bike was still for a while.

Sep 24, 2013 | Saddlemen Saddleskin Street Bike...

1 Answer

I have a 1986 Cavalcade that runs great then without warning stalls out. I think the fuel pump relay is bad. Does anyone know where this relay is located on this bike?? Thanks


Does it stall suddenly...or start sputtering as if its running out of fuel. The fuel pump stopping shouldn't kill the engine suddenly....each carb will empty and you will lose one cylinder, then two etc.
If its dying suddenly I would investigate your sidestand switch....when the bike stalls...do you ever find the starter won't immediately crank?

Apr 12, 2011 | 1986 Suzuki GV 1400 Cavalcade LX

1 Answer

I have an 1986 lincoln towncar i got a new fly wheel put on it and starter but for the past four months a have used three or more starters. everytime i start the car it has a loud scratching noise, couple...


the 4" dd starter had two different flanges for A/T and M/T. Your new flywheel probably doesn't match the teeth for the drive on the starter. Take the starter to a rebuilder that actually knows what they're doing-- not a parts store.

Aug 24, 2010 | 1986 Lincoln Town Car

1 Answer

Starter 86 F250 with 93 460


make sure wires on selinoid are on ther right sides if that isnt it replace selinoide

Feb 13, 2010 | 1986 Ford F 250

1 Answer

MY BIKE HAVED GOOD CHARGE , IM PUSH START BOTTON,


check you starter is working, to activate starter touch a wire from the battery to terminal on starter ,starter should turn..

Dec 21, 2009 | 1986 kawasaki ZL 900 A2 Eliminator

8 Answers

1986 Honda Shadow vt1100 does not start.


I don't know if this will help but just for GP the 85/86 Shadow are famous for electrical problems. If it is damp and you havn't cleaned the plugs not spark plugs the connector plugs on the wire harness it may have some buildup of that green stuff like a car battery does some time. On mine I ended up changing the coils and the electric fuel pump. You may have a problem with your stator also. Well this is just stuff I would check if it were mine. I got an 86 that runs as good as any of the new bikes that my friends have and just as fast. I hope this helped some.

Apr 10, 2009 | 1986 Honda VT 1100 C

1 Answer

Starter spining


I would try to start it again and all I get is a spinning and whining sound from the starter. It is as if the starter is not engaging somehow. A while after it cools down the bike will start agian. Does anyone have any possible answers. Thanks in advance!A lot of the starters are designed so the bendix shaft shears if it sticks to the fly wheel or over torques. If you remove the starter, connect a pair of vice-grips to the bendix gear. Jump the starter with a pair of cables, to get it to activate. The bendix will probably kick out, but not rotate. You should hear the armeture spin. Otherwise, the bendix will kick out, and you'll hear the armeture hum. If that's the case, check to make sure the fly wheel has been ground down, on the side facing the starter. However, you would probably hear grinding not spinning, if that were the problem.,,,

Nov 10, 2008 | 2007 ATK 450 Enduro

Not finding what you are looking for?
2008 HM CRE F450XI Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top HM Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

69199 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...