Question about 2008 HM CRE F250XI

1 Answer

Exhausts Hello there

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

I know this may sound rather stupid but my father has bought a brand new bike and he only intend to use it on our farm. Now the trouble is that neighbours complaint about the noise from the bike and we have asked the dealer if it was possible to get a more quieter exhaust, but he just said that you only were able to get exhausts that increase noise. So what we need is a exhaust which is less noisy (The standard one is direct flow, or what you call it) and one that doesn't sacrifice too much of the power. You can hear it miles away I love it, but my father tells me to only put a maximum of half throttle when I ride it, which is a little boring Can you help me ? , As for a quieter exhaust for your bike, your dealer wasn't very knowledgeable on the subject. While most aftermarket exhausts do increase noise, there are some to help decrease as well, without saraficing power. I can think of a couple over here in the US, but I'm not sure if you get many distributors for our stuff over there. There's also a European exhaust manufacturer that comes to mind, which is Leo Vince. And four-stroke exhausts aren't exactly cheap. Some ones that you could look into are: -FMF Powercore IV Q2 (around 96db) *slip-on* -Pro Circuit Type 496 (I'm not sure around what db level this is, but I know that the body is longer and it uses a special packing to help reduce noise) *slip-on* -Leo Vince X3 (every leo vince exhaust includes inserts for 99 and 96db, and also a spark arrestor) *full exhaust*,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, i have a dryer t3290 frigilux and is showing an error E8 in its screen , i dont know what could be? Do you have any ideas what could be?


This is usually a restricted exhaust warning. make sure exhaust is clear fom dryer to outside. Also try removing exhaust from dryer and running without and see if code comes back.

Dec 29, 2016 | Dryers

2 Answers

Why wont my 2007 aveo will not go faster than 20 mph


Fuel limitation. From tank to carb/injectors are you getting enough fuel supply? also Do you have a clogged air filter? Restricted exhaust system. To test exhaust system, unbolt the exhaust pipes from the manifold and see if it is restricting exhaust. If car runs better it needs exhaust work. All of above is if car runs good under 20 mph, Check fuel filter first, to see if its getting enough of fuel. Good-Day!

Aug 24, 2014 | 2007 Chevrolet Aveo Sedan

1 Answer

Blowing flames


Hello Carleton, Fire out of the exhaust port with no pipe is normal. You want to bring the piston to top dead center on the compression stroke. Both valves should be fully closed.

Mar 24, 2014 | Craftsman 42 in. Deck 19.5hp Lawn Tractor

1 Answer

Hi my dryer wont dry 100% the model # mytag MDG10CSAAW


hello caran.... the problem is most likely lint in the exhaust hose. pull the dryer out from the wall, remove the exhaust vent pipe and check it all out removing any lint you come across. also go out doors and clean the exhaust pipe and the vent cover. joe

May 23, 2011 | Maytag Dryers

1 Answer

Erroe code po405 on my car


Hello.
The error code PO405 = EGR, ( Exhaust Gas Recirculation ), sensor A circuit low input.

What the EGR does;
EGR = Exhaust Gas Recirculation system
Recycles small amounts of exhaust gas from exhaust system, 8 to 10 %, and mixes it with intake manifold air going into the combustion chambers. The addition of this inert, or non-combustable exhaust gas limits the peak combustion temperatures to a range that is below 2,500 degrees F, where the formation of nitrogen oxide, ( NOx ), is known to occur.

Here's a picture of an EGR valve to help you locate yoursem1cl_1.jpg
You may find that you just have a lose hose, or you may have a small vacuum leak.

I hope this helps you.
Donnie

Mar 09, 2011 | Ford Focus Cars & Trucks

1 Answer

Phillips Freevents 11NB5800


Hello sir, hi, try to check if the side exhaust fan is blowing out reasonable amount of hot air, if not you side exhaust fan is dirty, it may need cleaning, If the exhaust fan has reasonable amount of hot air blowing out, then you may need to buy laptop cooler, inquire about it at your laptop dealer.

Nov 07, 2009 | Computers & Internet

1 Answer

Hello, thermostate will not stay lit. vacation


Hello, if your going on vacation any way, just shut the power to it off at the breaker box and deal with it later.

Jul 07, 2009 | Fasco Bradford White Hot Water Heater...

1 Answer

Hello...I have an 09 elantra I just bought. It


The ticks and pings you hear is just the exhaust / header cooling down. Hot things expand and what your hearing is the exhaust system cooling down " contracting " . Dont worry about it, there's nothing you can do.

Jun 25, 2009 | 2008 Pontiac G5

1 Answer

How do you drop the starer away from the motor


Hello kiernan2002: My name is Roger and i will help you. There is no easy way to remove the starter. You will need to drop the exhaust down to gain the needed clearance to remove the starter. Try not to break the exhaust studs as you loosen the nuts. My experience is they will probably break. Make sure to replace the exhaust packing when you put the exhaust back up. otherwise they will leak. Please rate the answer you received. This is how we know you received need information. Thank You for using FixYa.Roger

Mar 14, 2009 | 1994 GMC Jimmy

1 Answer

Valve clearance


Hello, For all 615, 616 (4cyl) and 617 (5cyl) through 1985 model year is:
cold intake 0.10mm or .006in
exhaust 0.35mm or .014in
hot intake 0.15mm or .007in
exhaust 0.40mm or .016in
CYA, Gator241

Dec 16, 2008 | 1983 Mercedes-Benz 300-Class

Not finding what you are looking for?
2008 HM CRE F250XI Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top HM Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

71856 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...