Question about 2007 HM CRE 125R

1 Answer

Oil Is this a problem or am I going Crazy? Maxima Super M 2-Stroke oil

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Even mixing at 32:1 looks like straight gas. Not cloudy at all. I understand that it is a beige color but it is undetectable by sight in the gas. After a tear in the fuel line coming out of the carb I noticed this and immediately drained the gas tank figuring that there was an error. But made a new batch and the same thing happened. Has anyone else had this this problem or have noticed this?No worries, a lot of new low-smoke and synthetic 2 stroke oil is not readily detectable in the gas. If you want something that is easy to see in the gas try something with color added. Kawasaki makes a blended racing oil that has a dark green color added and is easily seen in the gas. I used to use it but switched to a full synthetic. I now use Castrol and it is undetectable once you mix it in the gas. Trust me, if you ran plain gas you would know it very, very soon!,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know fule oil ratio for homelite super2 chainsaw


Generally small tool 2 stroke engines run on a ratio of 50:1
That's 100ml of oil in 5L of petrol

Apr 03, 2016 | Homelite Garden

1 Answer

Can you use 50:1 if motor suggests 40:1


You can as long as you use a good quaility two stroke oil from a reputable two stroke manufacturer, do not use super market oil, or two stroke oil designed for out board motors.

Jun 23, 2012 | Garden

2 Answers

I have got 26cc homelite hedge trimmer what type of 2 stroke oil do i need for it, MANY THANKS


You can use any brand of two stroke oil as long as it says on the container that it is suitable for air cooled engines and you need to mix it at a ratio of 25 to 1. Regards Phil

Apr 19, 2011 | Homelite Garden

2 Answers

I ;have on older homelite super 2 saw. can use the newer oil in this saw with the 50to 1 ratio?


There is no reason why you cannot run any two stroke on todays two stroke oils ( its not like four stroke engines where you use different oils dependent on the age ) however i am not sure i would run it at 50-1 i would be more inclined to run it at 25-1 as it is an old engine.

Jan 29, 2011 | Homelite Garden

1 Answer

What gearbox oil do I use for a rm model 2 stroke


any transmission oil that is for m/c would do... you just have to pick your brand... i use maxima...

Dec 01, 2010 | 2005 Suzuki RM 250

1 Answer

What is the gas oil mixture for the 2 hp craftsman tiller One gallon of gas to ??? what type oil and how much per gallon of regular unleaded gas


You want 2 stroke oil, if it uses premix. You can buy little bottles of two stroke oil that are the exact amount you need for a a gallon of gas, or you can buy bottles with built in measurers to measure for whatever amount of gas. I usually use a 32:1 or 40:1 ratio on my equipment. You will find the two stroke oil in the lawn and garden section, automotive section, and in the marine section of most super stores (i.e. Walmart)

Apr 20, 2010 | Garden

2 Answers

First bike do i mix the oil and fuel on a 06 cr


If this is a Two Stroke Motor and it does not have Oil injection..

Then Yes and if your not sure it's safest to mix rather than not..

the worst you could do in the following situations is:

- if you have a 4 stroke
foul a plug and make smokey exhaust

- if you already have oil injection and your bike is 2 stroke, youll foul a plug and make smokey exhaust.


if were to run without any oil in a 2 stroke or too little....

you will sieze the piston rings or the lower crank bearing.... Very expensive to fix...


You actually sometimes have a second of notice from the motor that its about to blow .

when runnin too lean on oil ( too little )
the mototr all of a suddon picks up power on it own, just before it siezes:
this is becaus ethe lower crank bearing a are red hot and the gasoline is vaporizing as it passeacoss them on it way up through the ports,, this make the fuel super volitile..

Jun 21, 2009 | 2003 Honda CR 125 R

3 Answers

What oil should i have in yz 125 2 stroke


The clutch and gearbox share the same oil. The oil for the motor is 10w40. Stick with the major brands; Pennzoil, Quaker State, Mobil, Yamalube or Shell.

Apr 19, 2009 | 2003 Yamaha YZ 125

1 Answer

Oil


even mixing at 32:1 looks like straight gas. Not cloudy at all. I understand that it is a beige color but it is undetectable by sight in the gas. After a tear in the fuel line coming out of the carb I noticed this and immediately drained the gas tank figuring that there was an error. But made a new batch and the same thing happened. Has anyone else had this this problem or have noticed this?No worries, a lot of new low-smoke and synthetic 2 stroke oil is not readily detectable in the gas. If you want something that is easy to see in the gas try something with color added. Kawasaki makes a blended racing oil that has a dark green color added and is easily seen in the gas. I used to use it but switched to a full synthetic. I now use Castrol and it is undetectable once you mix it in the gas. Trust me, if you ran plain gas you would know it very, very soon!,,,

Nov 10, 2008 | 2003 HM Motard 250

1 Answer

Oil


even mixing at 32:1 looks like straight gas. Not cloudy at all. I understand that it is a beige color but it is undetectable by sight in the gas. After a tear in the fuel line coming out of the carb I noticed this and immediately drained the gas tank figuring that there was an error. But made a new batch and the same thing happened. Has anyone else had this this problem or have noticed this?No worries, a lot of new low-smoke and synthetic 2 stroke oil is not readily detectable in the gas. If you want something that is easy to see in the gas try something with color added. Kawasaki makes a blended racing oil that has a dark green color added and is easily seen in the gas. I used to use it but switched to a full synthetic. I now use Castrol and it is undetectable once you mix it in the gas. Trust me, if you ran plain gas you would know it very, very soon!,,,

Nov 10, 2008 | 2003 HM Motard 125

Not finding what you are looking for?
2007 HM CRE 125R Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top HM Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

67757 Answers

kakima

Level 3 Expert

101437 Answers

Are you a HM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...