Question about 2006 Gas Gas EC 250

1 Answer

Kick starter I have a new kick starter pedal base

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

New spring and little ball. My question is were does the little ball and spring go? I tried to get it down where the bolt threads in but no dice. Any help would be great.That's the detent for a fully closed (folded) kick start lever. Look in the splined base which you ordered (female) which fits on the kick lever shaft (which is also splinedbut male) there is the hole where the actual kick start lever fits. This in the same plane as the little indent in the lever it self. Put in the spring, Then the ball on top, press the ball down with a small screwdriver or whatever from one end as sliding the lever in from the other. Once the lever end has started over the ball just push in all the way and turn to engage the lever a couple of times to make sure the detent works. Then slide the unit on as you would any kick start lever. I did this in the field yesterday, so its not difficult. I used an allen wrench to push the ball down. Took maybe a minute. Hope I did not over explain, its pretty obvious if you look at it enough. Good luck.,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my Polaris Sportsman 90 to run


Hey Chris,

I need more technical info.

Did you line up ALL the timing/valve/cam/piston location marks when you assembled the engine?? A new head..?? - new valves, cam. ..?? Piston installed in the correct direction, Does the carb float bowl have gas in it..? (the drain screw is in the very bottom- loosen it and gas should flow out freely. What do you mean by "kick over".. does it have a kick starter? ..or will the motor not turn over with the kick starter? Please tell me more. Thanks

Mar 10, 2016 | ATVs

1 Answer

When I do a kick down in a 00 XJ8 Sovereign. It seems to be hesitant and the same when you kick down when the S button is engaged. If you build up the speed gradually, then kick down it seems ok


Kickdown switch not working....is this common? - Gassing Station ...

www.pistonheads.com/gassing/topic.asp?h=0&f...t...

PistonHeadsThe kickdown switch on 2000 model XJ8 3.2 Sovereign is not working. Based on members experience is this likely to a faulty switch or a computer problem? More results from www.pistonheads.com

XK8 Sluggish Performance

www.jaguarforum.com/showthread.php?t=76206
Nov 19, 2014 - A 2002 XJ8 SE, A 2000 XJ8 Sovereign, and a 2000 XK8 Coupe. ... If I only press the throttle pedal a little way, there is no kick down and the car ... Misfire, Lumpy running??? - Jaguar Forum.co.uk
Apr 3, 2015
Proud new owner of a Jaguar XJ8
Nov 21, 2014
Misfire/slight hesitation under hard acceleration - Jaguar Forum.co.uk
Feb 13, 2012
S-Type 3.0 SE Hesitant on Kickdown - Jaguar Forum.co.uk
Apr 7, 2008
More results from www.jaguarforum.com

XJ8 and Kick-Down - JaguarForums


Dec 16, 2015 | Cars & Trucks

1 Answer

I flooded my big red 300 1996 yesterday going through a river to fast,I keeped on the electric start untill it stop turning over the motor, I then waited for a wile and kick started it and it went fine....


You can kick start it but your electric starter won't kick it in ?
Have you check your main fuse to the starter, starter relay and all realted wirings?
You have fried the starter motor my friend when you keep trying to turn it over until the motor stops.
Well, from what you've described, you started motor have gone to brink, better get a new starter.
Cheers

Jan 30, 2011 | Honda Xr 250 Tornado Motorcycles

1 Answer

Need a wiring diagram that will assist in installing a remote car starter for a 2003 4x4 kia sorento


12 VOLT CONSTANT GREEN (+) and BLUE (+) IGNITION SWITCH HARNESS STARTER RED (+) IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 YELLOW (+) IGNITION SWITCH HARNESS IGNITION 2 N/A IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 ORANGE (+) IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 WHITE (+) IGNITION SWITCH HARNESS KEYSENSE N/A PARKING LIGHTS ( - ) WHITE (-) @ HEADLIGHT SWITCH PARKING LIGHTS ( + ) RED/BLACK (+) @ DIMMER SWITCH POWER LOCK BLUE (TYPE B) IN DRIVERS KICK PANEL, at DOOR HARNESS POWER UNLOCK WHITE (TYPE B) IN DRIVERS KICK PANEL, at DOOR HARNESS LOCK MOTOR WIRE WHITE (+) IN DRIVERS KICK, at DOOR HARNESS DOOR TRIGGER RED/BLACK (-) DRIVER KICK PANEL HIGH IN BLUE PLUG DOMELIGHT SUPERVISION USE DOOR TRIGGER, Requires Part #775 Relay TRUNK RELEASE RED/ORANGE ( - ), Requires Part #775 Relay IN DRIVERS KICK PANEL, harness to rear of vehicle SLIDING POWER DOOR N/A HORN BLUE/BLACK ( - ) @ STEERING COLUMN HARNESS TACH RED (-) @ COIL PACK WAIT TO START LIGHT N/A BRAKE WHITE ( + ) @ SWITCH ABOVE BRAKE PEDAL FACTORY ALARM DISARM ORANGE (-) IN DRIVERS KICK PANEL

Dec 21, 2009 | 2003 Kia Sorento

1 Answer

I need to know what color the ignition wire is so i can install a kill switch on my 06 F250 Powerstroke


hi, hope this will help.....if it does, could you leave a positive feedback for me please...many thanx..........
PART COLOR LOCATION
12 VOLT CONSTANT BLUE/RED (+) IGNITION SWITCH HARNESS
STARTER BLUE/WHITE (+) IGNITION SWITCH HARNESS
STARTER 2 N/A N/A
IGNITION 1 WHITE/ORANGE (+) IGNITION SWITCH HARNESS
IGNITION 2 N/A N/A
IGNITION 3 N/A N/A
ACCESSORY/HEATER BLOWER 1 BROWN/YELLOW (+) IGN SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2 PURPLE/GREEN (+) IGN SWITCH HARNESS
KEYSENSE BLUE/GRAY (+) IGNITION SWITCH HARNESS
PARKING LIGHTS ( - ) GRAY (-) AT HEADLIGHT SWITCH
PARKING LIGHTS ( + ) PURPLE/WHITE (+) SMART JUNCTION BOX IN PASSENGER KICK PANEL
POWER LOCK BLUE/LIGHT GREEN (-) TYPE (B) IN DRIVERS KICK PANEL
POWER UNLOCK YELLOW/PURPLE (-) TYPE (B) IN DRIVERS KICK PANEL
DOOR TRIGGER VIOLET(+) UNDER DRIVERS SILL IN HARNESS COMING FROM PASS SIDE
DOMELIGHT SUPERVISION GREEN/BLUE (-) HEADLIGHT SWITCH
HORN YELLOW/RED (-) AT STEERING COLUMN HARNESS
TACH BLUE(AC) AT HARNESS NEXT TO BRAKE PEDAL
WAIT TO START LIGHT N/A N/A
BRAKE PURPLE/WHITE (+) AT SWITCH ABOVE BRAKE PEDAL
ANTI-THEFT TRANSPONDER ANTI-THEFT TRANSPONDER @ IGNITION SWITCH TUMBLER

Aug 05, 2009 | Ford Super Duty Cars & Trucks

1 Answer

Need brake circuit diagram for 1991 chrysler new yorker


Hi,
1991 Chrysler New Yorker Auto Security Wiring Diagram
Battery Constant 12v+ Positive Wire (+): Red and Pink
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Dark Blue
Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Black/Orange
Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Positive Wire (+): Black/Yellow
Parking Light Positive Wire Location: In Drivers Kick Panel

Power Door Lock Positive Wire (+): Orange/White Or Orange/Violet
Power Door Lock Positive Wire Location: In Drivers Kick Panel

Power Door Unlock Positive Wire (+): Pink/Violet
Power Door Unlock Positive Wire Location: In Drivers Kick Panel

Door Trigger Negative Wire (-): Yellow
Door Trigger Negative Wire Location: In Drivers Kick Panel

Dome light Supervision Wire: Use Door Trigger (Requires Relay)
Dome light Supervision Wire Location: N/A

Trunk Release Positive Wire (+): Black/White (Requires Relay)
Trunk Release Positive Wire Location: At Trunk Release Switch

Horn Negative Wire (-): Black/Red
Horn Negative Wire Location: At Relay In Fuse box

Tachometer Wire Negative Wire (-): Black/Gray
Tachometer Wire Negative Wire Location: At Ignition Coil

Brake Light Positive Wire (+): White
Brake Light Positive Wire Location: At Switch above Brake Pedal

Factory Alarm Disarm Wire (-): Light Green/Orange
Factory Alarm Disarm Wire Location: In Drivers Kick Panel

Factory Anti-Theft System: N/A
Factory Anti-Theft System Location: N/A


Thank You for contacting Fixya.com

Aug 03, 2009 | 1991 Chrysler New Yorker

1 Answer

I have an old moped. IT's a simple 2 stroke with a


What do you mean
"wont kick start with battery" ?

Is the starter turning the motor ?
If not - the starter could be stuck..
WHILE tring to start it with starter - give the actual starter a smack with a wrench..

Rate well ;o)

Jul 22, 2009 | 1979 Honda CBX

1 Answer

Kick pedal for rock band dosent work


I acutually snapped my rock band kick pedal in half and discovered alot about it. The way the kick pedal actually works is with a little magnet thats under the orange part. if your orange bar piece fell of or anything check that or take a magnet and tap the top of the kick pedal near were the wire comes out and if it reacts on the game then theres nothing wrong with the kick pedal just check the little magnet make sure its there. After I broke my kick pedal i went out and cut a piece of diamond plate metal in the shape of a foot and basically made another pedal piece and welded bigger magnet on it and now it reacts on time and alot better it seems cause its heavier. Hope this helps!!

Dec 30, 2008 | MTV Games Rock Band for PlayStation 2

1 Answer

1995 Chevy Blazer Wire Color Codes


95-97 blazer or 94-97 S-10
12volts red (there will be 2)+ ignition harness
Starter purple or yellow + ignition harness
Ignition pink + ignition harness
Second Ignition white or pink/white + ignition harness
Accessory orange + ignition harness
Power Lock lt. blue + either kick panel
Power Unlock white + either kick panel
Lock Motor gray drivers kick panel
Unlock Motor tan drivers kick panel
Parking Lights+ brown switch or rear harness
Door Trigger white - keyless module
Dome Supervision use door trigger
Trunk/Hatch Pin tied in with doors
Trunk/Hatch Release black/white + switch or keyless
Tachometer white AC ECM
Brake Wire white + at brake pedal switch
Parking Brake black at the pedal
Horn Trigger black - steering column

Jun 13, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
2006 Gas Gas EC 250 Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gas Gas Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Luc Francoeur
Luc Francoeur

Level 2 Expert

102 Answers

Kim Halliwell

Level 1 Expert

32 Answers

Are you a Gas Gas Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...