Question about 2007 Gas Gas EC 125

1 Answer

Clutch basket I recently bought a new basket for my 2005 125

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

But it was not as deep as the original. Did the older bikes have a sallower basket. Mine is a 2005 and holds 8 fibers and 7 steel plates. I can't find any partd lists for the older bikes on the web. First a question. Are you using the original clutch fiber plates and friction disks or, did you get a new pack of plates and disks to go with the new basket. I'll explain my question below. The clutch on the 125 is sort of touchy. I tried various configurations, mainly using all steel drive plates, instead of the combination of steel and aluminum. I was only able to make it work properly using the OEM GG configuration. The 125 uses a different clutch than the larger bikes. (The 200's clutch basket has a different gear on the back, but otherwise it's clutch is the same as the larger bikes.) Make sure your replacement clutch disks & plates are not for the larger bikes. (I recently saw an ebay seller's auction that claimed to be a clutch rebuild kit for the GasGas bikes. It only had 7 friction disks. ) The original clutch for the 125 Gasser had a combination of aluminum and steel drive plates. The friction plates were all the same. The 2005 parts book lists them as being 3 iron disks and 4 aluminum disks. (In my memory, I thought it was 4 steel and 3 aluminum.) If you download and look at the parts book, http://www.gasgasmotos.es/rcs/manual...emotorec05.zip , the 125 clutch is on one of the last pages of the book. (page 48 of 50) BTW. I still have a new OEM GasGas 125 clutch pack in my stock; if anyone is interested. (side note: The clutch push rod for the 125 is only a few dollars. The clutch push rod for the larger bikes is in the $35 range.),,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New fibers and basket installed but clutch will not disengage


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair, not for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Clutch replacement fzr1000 The FZR Forum
13 Clutch Removal yzf600 1996
https://www.tradebit.com/filedetail.php/243740163-1989-1995-yamaha-fzr-1000-genesis-exup-fzr1000
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

Aug 12, 2012 | 1995 Yamaha FZR 1000

Tip

DR650 dismantle. Save $$$


A recent motorcycle tear down to 3rd gear, should have required several "special suzuki" tools, none of which I needed, saving nearly $900. To undo clutch basket centre nut, simply take of drive sprocket and use 24mm socket over drive shaft to hold clutch basket still.

on Apr 22, 2010 | Motorcycles

1 Answer

Clutch basket


Hi, Colsall whichever way the clutch pack normally turns that's the direction the nut comes off sorry you can't find the first and best tool you ever bought for your Ducati despair not, for a mere $10 you can download another one. For more information about your issue and free valuable downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.ducati-upnorth.com/forum/showthread.php?17212-Ducati-999-clutch-basket
http://www.ducatimonster.org/forums/tech/98046-clutch-dismantle.html
Ducati 999 RS 2004 PDF Motorcycle Service Shop Manual Repair Guide...
Ducati OEM Parts Fiche Lookup and Online Ordering
Ducati Maintenance

Jul 04, 2012 | Ducati 999 Motorcycles

3 Answers

Have a 2006 ktm 250 sxf seized rod to the crank got it changed reinstalled put motor back together now can not even kick it like somthing is stuck. Toke the clutch basket out, timing gear and water pump...


Your clutch basket is the link between the engine and transmission. Your kick starter rotates the clutch basket gear, which turns another gear at the engine crank. Remove either the basket or gear at the crank and see if the engine, and the transmission both turn. Sounds like the engine is stuck for some reason. At least you can cut the issue in half.

Aug 13, 2011 | 2006 KTM 250 SX-F

1 Answer

I have a 1991 yz 125 and the shift shaft was stripped so i replaced it but now that i put it back together the clutch isnt working right, when i hold in the clutch it wont engage. I filed down the clutch...


Hi, Jarhead456 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to install Brand New Clutch on 2001 Yz125
YZ125 Part 11 2 Stroke Installing Clutch and Repairing Clutch Basket
YAMAHA YZ125 Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jul 27, 2011 | 2003 Yamaha YZ 125

1 Answer

Little noise coming from the engine when idling.


Where is the noise from exactly? It sounds like clutch basket rattle, often happens when idling, worse when cold, not so bad as engine warms up. If it's from the top end it's probably tappets. Change the oil if you haven't recently done so and see if that helps. clutch basket is no problem unless it gets REALLY noisy and gearchanges are difficult, then change clutch plates and clean up basket. Tappets or shims will need to be done at next service so performance will be maintained, if it's top end.

Jul 02, 2011 | 1993 Honda VF 750 C Magna

1 Answer

Washer does not spin but makes loud clicking noise?


sounds like you could have a problem with your basket drive tube,around the clutch brake area! my machine would not spin and i found out the bottom of the basket drive tube had been ground off by the thrust washer which resulted in the clip that holds the brake release arm fell off and broke the 2 little pins on the brake release arm and it would not disengage the brake to allow the basket to spin, i bought a used basket drive tube and a new clutch ,installed and unit works fine now,,,so take a look also check your motor coupling see if it is broken ,,, and 1 more thing ,up under your agitator is the basket drive block sometimes it shears off the notches on the top of your drive tube!

Feb 17, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

When it is on the rinse cycle it makes a horrible sound


could be a clutch or drive tube problem, on the bottom of your basket drive tube is a thrust washer,it eventually wears off the boyyom of the tube and your clip that holds on your brake release arm falls off breaking your clutch arm and thus no spin will happen ,, sounds like yours is grinding off the bottom of the basket drive tube,, mine was always screaching on the rinse spin and finally gave out when it wore the bottom off my tube, went and bought a used tube installed it with a new clutch and works fine now no more screaching!

Feb 16, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Clutch rattle and notchy gearchange


dear sir the springs in your clutch is what puts pressure on clutch discs. these springs should all be the same length they should be measured with a caliper and compared to specs . the notchy feeling on your clutch is caused by wear spots on your clutch basket. if you are careful they can be filed down just keep them straight this will restore a smooth clutch feel. to check progress slip a clutch disk in the basket all outer dogs of the clutch plate must contact basket at the same time good luck jim

Mar 15, 2009 | 1999 Yamaha TRX 850

Not finding what you are looking for?
2007 Gas Gas EC 125 Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gas Gas Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Luc Francoeur
Luc Francoeur

Level 2 Expert

102 Answers

Kim Halliwell

Level 1 Expert

32 Answers

Are you a Gas Gas Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...