Question about 2001 Ducati 900 SS i.e. N-C

1 Answer

1997 900SS SP Not Starting

Hi Everyone

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

My 1997 900ss/sp will not start. I'm new to this bike so I'm wondering if there are some known issues to look for... Here are the symptoms: 1) Engine turns over fine and strong but does not fire up 2) I smell gas 3) I am getting a spark 4) After letting it sit and dry out a bit tried again. It backfired and flames came out of the exhaust pipe - Thanks in advance for any suggestions!Can't tell from the post whether or not it's been sitting a while. If it has even for as little as a couple months, the first thing to do is drain the fuel and get some fresh stuff in there, float bowls too if you can. From my experience, they are sensitive to stale fuel. Wouldn't hurt to throw in new plugs too and of course charge the battery.,,,

Posted on Nov 10, 2008

2 Suggested Answers

  • 2712 Answers

SOURCE: 1997 900SS SP Not Starting

My 1997 900ss/sp will not start. I'm new to this bike so I'm wondering if there are some known issues to look for... Here are the symptoms: 1) Engine turns over fine and strong but does not fire up 2) I smell gas 3) I am getting a spark 4) After letting it sit and dry out a bit tried again. It backfired and flames came out of the exhaust pipe - Thanks in advance for any suggestions!Can't tell from the post whether or not it's been sitting a while. If it has even for as little as a couple months, the first thing to do is drain the fuel and get some fresh stuff in there, float bowls too if you can. From my experience, they are sensitive to stale fuel. Wouldn't hurt to throw in new plugs too and of course charge the battery.,,,

Posted on Nov 10, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make reset for sc 544 for Ricoh Aficio SP 9100DN


Reseting SC 544 error code on Ricoh copier
Press CLEAR MODE(yellow) key,
Press 1 , 0 , 7
Press and hold down CLEAR/STOP (red) key for more 5 sec.
Press in the SP Mode( on the touch pane)
Go to sp5810 and reset SC code
Open the front door turn OFF the power main switch, and turn it ON

Heating roller overheat 1 (hardware error)
During stand-by mode or a print job, the detected heating roller
temperature reaches 220 °C.
Defective PSU
Defective IOB
Defective BCU
Defective fusing control system
Related SC code: SC 543
1. Replace the PSU.
2. Replace the IOB.
3. Replace the BCU.

Jun 08, 2016 | Ricoh Aficio SP 9100DN Laser Printer...

Tip

Unlock your samsung phone in just a simple trick


hi there everyone i would like to share this trick for some of samsung mobile phones

having problem with your phone it always says wrong card????

then try this one...

Note...this code is not working with some of samsung phones...
so just try it...100% it will not damage your phone

just follow this step


1st Make Full Eprom Reset *2767*3855#
After Rebooting Mobile
then enter....
*7465625*638*00000000*00000000# (to change NCK code to 00000000)

then enter...
#7465625*638*00000000# (to permanently unlock the phone)

check the lock status...
*#7465625#

Input *#7465625# to check the locks....all locks should now be inactive as shown below:


network lock - inactive
subset lock - inactive
sp lock - inactive
cp lock - inactive
sim lock - inactive
activa lock - inactive
phone lock - inactive
auto network - inactive
auto subset lock - inactive
auto sp lock - inactive
auto cp lock - inactive
auto sim lock - inactive

hope it will help you

on Dec 30, 2009 | Cell Phones

1 Answer

Rgv250 starting problem


Iv had problems starting my RGV too. Try changing both spark plugs. If that doesn't do it you should give the mechanic who restored it a call, may be a stiff carb slider on only 1 cylinder

Feb 01, 2010 | 1996 Suzuki RGV 250 SP

1 Answer

1995 900 sp clutch does not disengage when lever


hi,this may help,it sounds like your clutch plates are stuck together,this is quite common on bikes that have been parked up for a while,mine does it ocasionally,i fix it by getting the bike moving and crash starting it,once you have got it running and moving with the bike in the highest gear you can get it into(you can change up and down the gearbox without the clutch and not do any damage)simply pull the clutch lever in and roll on and off the throttle a couple of times and the clutch should disengage...hope this helps

Aug 02, 2009 | 1998 Ducati 900 SS

3 Answers

Need a schematic diagram on a uniden grant lt


http://www.cbtricks.com/radios/uniden/grant/graphics/grant_sch.pdf

Jan 29, 2009 | Uniden GRANTLT 40-Channels Base CB Radio

1 Answer

1997 900SS SP Not Starting


My 1997 900ss/sp will not start. I'm new to this bike so I'm wondering if there are some known issues to look for... Here are the symptoms: 1) Engine turns over fine and strong but does not fire up 2) I smell gas 3) I am getting a spark 4) After letting it sit and dry out a bit tried again. It backfired and flames came out of the exhaust pipe - Thanks in advance for any suggestions!Can't tell from the post whether or not it's been sitting a while. If it has even for as little as a couple months, the first thing to do is drain the fuel and get some fresh stuff in there, float bowls too if you can. From my experience, they are sensitive to stale fuel. Wouldn't hurt to throw in new plugs too and of course charge the battery.,,,

Nov 10, 2008 | 1998 Ducati 900 SS

1 Answer

Problems with camera


Hi everyone,

I found you because 10 minutes ago, my camera exhibited the same behavior as all yours. All of a sudden, the red and green lights started blinking on and off and nothing worked. I just tried switching batteries and the camera is working! I am using a couple of RCR-V3 Li-ion rechargeable batteries, which I purchased on Ebay three months ago. Thought I'd pass it on.

Take care,

Rosane.

Jul 17, 2008 | Olympus SP-350 Digital Camera

6 Answers

Gameboy advance sp - water damage - won't charge!


Hi Suzy,
it,s not worth repairing.
the cost of a new motherboard and fitting will cost more than the Gameboy advance. i bet the three year old lads not the flavour of the month, with the 7 year old :)
have a look on e-bays the best, not everyone wants these anymore. you might find One on Swapz.co.uk if your in England.
Hope this answers your question.
Mike @ Compurepair.

Feb 22, 2008 | Nintendo Game Boy Advance Console

2 Answers

Gameboy advanced sp


32adab0.jpg
sorry!!
this is most likely to be a twisted ribbon cable

to fix this

1 Philips screwdriver
1 triwing screwdriver

1 open up the console

2 undo the top part and detach


3 straighten the ribbon cable

put back together

send it to Nintendo if it doesn't work

good luck

Nov 19, 2007 | Nintendo Game Boy Advance SP Console

Not finding what you are looking for?
2001 Ducati 900 SS i.e. N-C Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ducati Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4507 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

yadayada
yadayada

Level 3 Expert

66126 Answers

Are you a Ducati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...