GS80 How to put carb and lines back together
SOURCE: !983 honda magna v45 clutch not engaging
if you rebuilt your carburetors you have made a mistake when you reassembled them a carb must sprsy a fine mist of "dry" fuel into the engine intake your carbs are flooding you need to check your fuel floats , jets and, don't forget to check the power piston circuit and, balance (sync) your carbs on the bike when you're done
your chuch is fine if you did not touch it
I would go back to scratch. Disassemble the clutch basket and reassemble it making sure you have it set in proper order. Then reassemble every thing. Also double check the clutches you bought are the proper ones for your bike.
SOURCE: I have a 1978 Yamaha DT175E. It is runnig rough
Check the choke to see it is not stuck on.
Something is causing the bike to run rich as you said.
Make sure the throttle slide isn't stuck and is working ok.
Try a smaller size jet.
SOURCE: honda big red 250 how to put back together
Go to the site below where you can see a parts diagram for your specific ATV. Being able to see the parts in secquence should help you to reassemble the motor. Get a new friend. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx
52 views
Usually answered in minutes!
×