Question about 1998 Cagiva Canyon 900 i.e.
New procut basket and barnett plates. Had to file the barnett friction plate tangs they all slide but are a tight fit. All plates installed carefully per the Barnett instructions. Started the bike in neutral all fine shifted into 1st clutch in, I feel the bike want to creep forward although just slightly (I can hold it with my feet down). Can't get to neutral again with the clutch in until I shut the bike off. So, just before I go back in and pull a plate out to make the clutch pack smaller, i wondered whether anyone here has had this problem and whether if I ride it like this for a short while whether the clutch pack will settle in and fully disengage?,A too-high overall thickness of the plate stack will cause drag between plates when the clutch is disengaged making it difficult to select neutral when the bike is stopped. The last 2mm steel plate can be interchanged with a 1.5mm curved plate facing away from you if you want to adjust the stack to get the 38mm stack thickness, or if you want a more progressive, soft clutch engagement. A commonly-used substitution that adds an additional spring plate to the stack. Any of the steel 2mm plain plates can be exchanged with 1.5mm plain plates to reduce stack thickness or increase stack thickness as needed to achieve your desired overall height. You will see the need for this as friction plates wear, so keep your steel plates from pervious clutch replacements as spares to be used as height adjustments later. The 2mm and 1.5mm steel plates only need replacing if they’re scored or warped.,,,
Posted on Nov 10, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 14, 2016 | Nissan Cars & Trucks
Apr 30, 2014 | 2004 Nissan Altima
Mar 08, 2014 | Toyota Pickup Cars & Trucks
Apr 05, 2013 | Cars & Trucks
Apr 19, 2012 | 1991 Jeep Wrangler
Jan 12, 2012 | Polaris ATV
Sep 06, 2010 | 2003 Hyundai Tiburon
Jul 17, 2010 | 2004 Hyundai Elantra
Nov 13, 2008 | 2006 Volkswagen Jetta
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: