Question about 2006 Buell Lightning XB12Scg

2 Answers

Cable melted I was riding home from work today and noticed a rattle

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Buell Master
  • 962 Answers

  • Multi-color,silver,golden,rose gold decide your choice which you like.
  • High-speed,transmission rate synchronization and transfer music, contacts, quickly and efficiently.
  • Flexible cord,lighting cable perfect forevery house hold ,when you want to use your device in bed or other on soft place
  • Durable,with nylon braided,better to protect the cable.
  • Perfect for your some Iphone device , high speed data transfer will make you have a good time .
Amazon com Charm sonic 2Pack 4 9Feet 1 5Meters Lightning Cable USB Charger...

Posted on Dec 27, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Then when i got to a red light about a 5 miles from work i smelled burning rubber. I pulled over and the cable that runs down the front of the motor melted because that little twisted wire that was supose to hold it in place broke for no reason and let the cable hit the headers?  Would replacing this be under warranty or not b/c I have read on here of the same problem?There's a new clip out to hold the clutch cable into place. I would try and get that done under warranty. They know it's a weak spot and it's a bit soon for the clip to break within a year. ,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electrics have stopped working ok ktm 125


It is possible , but unlikely. Plug it all in and see.

Jul 01, 2013 | KTM 125 EXC Motorcycles

2 Answers

Today while I was riding my 2001 Yamaha YZF-600R i noticed that in first gear ( could be others as well) when i hit around 7-8k RPM's it kinda skips. I don't really know how to describe it,but its...


Under the seat in front of the battery I'd a dmsll box with I think 6 wires, it's a rectifier box and when they heat up a wire melts, I just fixed another Yamaha that did the same thing u are describing and that's what the problem was

Aug 10, 2011 | 2001 Yamaha YZF 600 R thunder cat

1 Answer

My 2000 cbr 929 engine works awesomely. There seem to be a rattling sound on the right side of the engine when the clutch cable is pulled the sound disappear. Is it normal for the clutch box of this model...


hi mate,mine 929 do the same noise as well from 30.000km till today 66.000km.everybody says that it is an old cbr's issue.when it will get much much worst just change the clutch plates not the discs if no need...i am used to that noise and i like it..it gives personality!!!

Aug 26, 2010 | 2001 Honda CBR 929 RR Fireblade

1 Answer

Rattle and slippage when engaging clutch, only when hot after a ling ride. does not rattle or slip at all when clutch is fully engaged.


Clutch plates may be worn. You would have to pull the side cover to inspect them. Honda clutch's always rattle at an idle when in neutral. If you just pull in the clutch lever the rattle will go away. Let the lever out and it will rattle again. As for the slippage, if your clutch cable is binding at all it will keep the clutch from fully engaging when you release the handle. This will cause the clutch to slip for a second or two until the cable fully releases from the bind. Any resistance in the cable and you should replace it.

Aug 04, 2010 | 2003 Honda CB 250 Nighthawk

1 Answer

My bikes actually a 2000 gsxr600 anyway I was riding today and when I took off from a stop the bike lost all power and backfired real loud so I pulled the clutch in and barely got it home. When I got it...


not a good idear adding more oil to the fule it realy dont need it and it only gloos up the works,,,as for this fuse blowing it could be your battery took a wack and you busted the plates inside it but that wont do anything to the head lights thats another fult

Jun 13, 2010 | 1999 Suzuki GSX-R 600

1 Answer

I was riding home today and my speedometeron my


Check the speedo cabel for damige and reconect both ends. i had this same problem and found that the cabel had sliped out of the connection on the back of the speedo. Hope this helps

Apr 19, 2010 | 2007 Yamaha Ybr 125

1 Answer

Starting problem S&S 96 CI engine


sounds like the starter solonoid is not working properly if the batt cable got hot enough to smoke that says the batt, is ok and it is ok to jump with car, the solonoid is making the clicking noise and a real hot batt sometimes will make it work, the repair is simple and cheap if you are talented just get a solonoid repair kit three screws 5 min, and you are RIDEING.

Dec 31, 2008 | 2003 Harley Davidson FXSTDI Softail Deuce

1 Answer

My MT-03 is vibrating an making a bit of a rattling sound


Hi Mattandem

Best approach to working out these sorts of problems is to pull the tank off again,and carefully check all your work. Particularly any new wiring, or wiring that you may have disturbed whilst installing the grips. Check also that all of the rubber mounts for the tank are correctly in place. Cabling has a tendency to rattle quite loudly against any and everything on your bike. Vinyl insulation tape lagging new cables to existing looms is an effective way to stop them rattling, and strategically placed cable ties, particularly about the front end and headlamp fitting. Good luck with the de-rattle. Let me know how you got on. Cheers

regards
robotek

Dec 06, 2008 | 2008 Yamaha MT-03

1 Answer

2008 1200 rt-p engine rattle during high speed deceleration.


keep on your dealer on your drive there is a spring pressure that holds a coupler together look at pic .
this is where we have had problems with the older ones

338a68f.gif

Nov 17, 2008 | 2007 BMW R 1200 RT

1 Answer

Placement of Throttle Cable


I can't tell you how glad I am to hear of a problem my '05 FSE doesn't have! Mine won't melt the throttle cable to do that it would have to start (kick or electric) and then stay running (just shuts off now and then). Haven't dared take it more than 1/2 mile from home (couldn't push it back from any further) now it's warm enough that I don't want to push it at all so it will probably continue to gather dust until fall. I sure wish there was a dealer within a few hours ride who knew anything about them.,,

Nov 10, 2008 | 2003 Gas Gas EC 400 FSE Supermotard

Not finding what you are looking for?
2006 Buell Lightning XB12Scg Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buell Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Buell Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...