Question about 2008 Buell Lightning Long XB12Ss

1 Answer

Mysterious backfire I have an 07 XB12Ss with a mysterious backfire through the airbox. It happens occasionally when pulling away from a stop

Posted by on

  • strono62 Jan 11, 2009

    Engine backfires threw the intake then hesitates momenterily, when accelerating from a stop. It seems to be in relation to throttle position. Any solutions?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

And has happened when engine braking. The strange part is when the other day I was in 5th gear going 60mph it did it again. It has 2600 miles on it from when I bought it new and and have followed the manufacturers instructions for break in & maintenence to the letter. I have been back to the dealer twice for the same problem and they can't duplicate the problem.Its normal.  Only things I have found that help to cure the problem the easiest way, is to re-route the breather and open up the airbox.,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 Ford Windstar backfiring


Bad fuel. Do you have locking gas cap? If not there seems to be a mysterious water in the tank. Otherwise, possible bad mass air meter, or timing belt. Bad electrical connections (from salt) cause bad behaviors. Clean electrical connections to bright metal both sides.

May 03, 2015 | Ford Cars & Trucks

Tip

I found this a couple of weeks ago the first time we had the mysterious blinking...


The blinking "clean light" is a common problem with some of the Kenmore and Whirlpool models dishwashers. The problem is usually attributed to water supply temperatures being too low when filling. Apparently, there are some issues with the temperature sensing circuits in some dishwashers that causes an error code to be generated if a certain water temperature is not achieved in a specified time interval (this time may differ between models). There is a reset sequence that you can try to clear the fault. Push the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. This will clear any existing faults and should return the dishwasher to normal operation.

To keep the fault from returning, it is recommended that you run your hot water faucet in the kitchen until it runs hot BEFORE you start the dishwasher. This will heat the water in the supply line for the dishwasher (most dishwashers are fed from the kitchen sink supply line). The theory is that if you fill the dishwasher with hot water from the start of the wash cycle instead of the cool water that is normally in the lines (especially if you have a hot water tank located far away from the kitchen), this should satisfy the requirements of the temperature sensing circuits. If the fault reappears, there should be a tech sheet located inside the lower panel under the door that explains what the fault is. The flashing light will be a series of flashes, followed by a pause. If you indeed have a component problem, it will depend on the number of flashing lights in the sequence. Refer to the tech sheet to determine WHAT component is affected and how to troubleshoot.

on Apr 12, 2009 | Kenmore 24 in. 17482 / 17484 / 17489...

1 Answer

My keyless stopped working last week and now my windows roll up and down on there own when i lock my carand walk away. Now my doors unlock and lock when i drive down the road...then last nite my remote...


ive sen this before and im fairly certain the key fob itself isyour problem.to confirm remove the internal battery from the fob and from any additional ones you may have.if your mysterious window and lock problems stop then you definitely need a new fob.please let me know how you make out.

Feb 12, 2011 | Nissan Murano Cars & Trucks

1 Answer

I am trying to change the clutch cable on a 07 xb12ss and a piece fell into the crank case. how do i remove the cover so that i can retreive the part this is such a poor design whats the best way to get it...


Not a poor design, if you dropped something down inside of a say Honda - you would be splitting the cases to get it out. On the Harley/buell motor you just loosen all of the allen head bolts and remove them and remove the shifter assembly and pull the inspection cover off. pull the next set of bolts if you want to remove the whole cover.

Sep 11, 2010 | 2007 Buell Lightning Long XB12Ss

1 Answer

I caonnot reset my epson rx580 printer


Try the R270 Adjustment Program, it works on some RX series. If it doesn't work, try the other resetters for the RX series (e.g. RX585). Go to this link:

http://www.mediafire.com/?sharekey=1cf9febf0684e438ab1eab3e9fa335ca3c3f0bf9008c2dad

Good luck!



Jul 25, 2010 | Epson Stylus Photo RX580 All-In-One...

1 Answer

Eurovox codes for n*l dublin 14.03.09


Just input these codes from Bilmandy and they worked for me in Dublin on N*L for Eurovix Max V and it's all good again, even though the date is old. Mysterious! 00/ BO B8 4F 04 E6 5F 87 80
01/ A3 EB EC 07 D6 49 D2 EB
CODES FOR THE 27 -2 -2009 (worked 15-3-2009 at 8.15pm)
5401 EUROVOX MAX V CODES

Mar 14, 2009 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

999 Starting problem, deducing step by step


Next time this happens, take out 1 spark plug and inject a little gas, replace the plug. (You can do both f you want but 1 is enough) If the bike fires up it is prob not getting gas for some reason…

Nov 20, 2008 | 2003 Ducati 999 R Fila

1 Answer

07 Buell 12Ss shaking


not just a vibration but more of a shake at 1500 to 1700 rpm. Is this just life with a Buell or should it be checked out?These bikes are known to shake alot at idle. Check if your tires properly balanced.,,

Nov 10, 2008 | 2008 Buell Lightning Long XB12Ss

Not finding what you are looking for?
2008 Buell Lightning Long XB12Ss Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buell Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Joseph Hoffmann

Level 3 Expert

1701 Answers

Are you a Buell Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...