Question about 2005 Beta Eikon 125

1 Answer

Starter stay engaged

Just trailered my bike in an enclosed trailer about 700 miles. rachet straps

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

And it took the ride well. when i started it up the selenoid or start button stayed engaged. now when i turn the ignition on it try's to start up without hitting the button. just turn the egnition and the starter is engaged. i tried replacing the selonoid but it still does it. any info??? You need a wiring diagram. Souns like a premature ground AFTER the solenoid but before the switch.,,

Posted on Nov 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to tie down for hauling on a trailer

Hey Bob,

I just moved a mini van on a trailer and had no problems, I put the Emergency brake on with vehicle in park. Then I used two heavy duty rachet straps in the front pulling toward the front and two more in the back pulling toward the rear (1 on driver side and 1 on passenger side both front and back) I had wooden block under the tires as well to keep it from moving in case something went wrong.

Jan 03, 2013 | 2006 Mazda Tribute

1 Answer

We bought a used Burley d'lite bike trailer and want to know what all the straps are for. There is no manual with it. Can we get one?

If you have the flatbed they are for securing the load. If you have the child carrier they are either the straps that act as cusions or the ones for securing the child. The straps on the outside are for starpping accesories and structure.

Apr 19, 2011 | Burley D'Lite Trailer

1 Answer

Instep bike trailer assembly

This is the manual for the model that you have. Pictures included.

May 25, 2010 | InSTEP EZ Bike Trailer

1 Answer

I have this Schwinn Trailblazer Bike Trailer and Stroller. It is wonderful. However there is a strap that is bolted on to the main frame and to the spring end that connects to the bike hitch. My husband is...

This particular strap is a safety backup strap. This strap is just for in case that the first one securing the trailer to the bike breaks so it will still stay connected to your bike.

May 20, 2010 | Schwinn Trailblazer Bike Trailer

1 Answer

Need to tow 1999 F250 about 150 miles home. What

If you have a stick shift, you rent a 2 wheel tow dolly and run the front tires onto it and strap it down. Put the truck in neutral and away you go.
If you have an Automatic you want all 4 wheels on a flatbed or tow trailer. You rent a car hauler trailer and piggyback the truck onto the trailer. A good rental will know the weight and rent you the right trailer.

Nov 22, 2009 | 1999 Ford F250 Regular Cab

1 Answer

The straps have deteriorated on the seat of our InStep trailer. Is there a replacement seat with straps that we can purchase.

you can call the company at (800) 242-6110 otherwise depending on the where the straps are you can goto almost any store - home dep - lowes - target - and make straps. Cut a hole either in the back or under the seat and strap them through.

Aug 23, 2009 | Take 2 Interactive Instep Take 2 Bike...

2 Answers

How and where do you hook on the bike trailer to the bike?

Your bike trailer has a washer looking thing with usually-two holes(one large and one small) The smaller diameter hole mounts to your left side rear axle nut or your quick release wheel nut-meaning, take off the nut or flip thumb tab and unscrew, slip on washer thingy and tighten back down.

The larger diameter hole should be in the downward position like a teardrop, this accepts the bent frame pole from the trailer by use of the spring clip/pin. Slip frame pole into larger hole and lock in with clip and your on your way. ***Just don't forget to attach safety strap from the frame pole to your bike -should the clip ever come undone.(unlikely)

***Do have a bike shop or pro look at the finished hookup if your concerned for safety

Aug 08, 2009 | InSTEP 12-QE111 Quick N EZ Bike Trailer

1 Answer

What is the proper way to transport a used stacked washer/dryer in my trailer?

It is best to transport it upright and tied down with rachet straps. Make sure you have it strapped down tight and side to side and front to back. If you cannot move it this way, it will not hurt the unit to set it down on it's side. as long as it is not full of water. As long as it is dry it is safer to gentlty place it on its side. Always use tigh down straps. Be careful

Jul 01, 2009 | Kenmore Washing Machines

1 Answer

Trailer fuse blows when hooked up

Is your truck wired for a 7 pin flat plug? if so are you using an adapter? The adapters are made differently. One has the center pin as brakes and the other uses the center as Aux. power. Any chance of an animal getting to the wires? They are kown to chew on the wiring. Also try They have a great website with lots of info.

Jun 02, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
2005 Beta Eikon 125 Logo

Related Topics:

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Beta Experts


Level 3 Expert

711 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

44792 Answers

Damian Appert
Damian Appert

Level 2 Expert

112 Answers

Are you a Beta Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides