Question about 2005 Beta Alp 4.0

1 Answer

High idle or no start

I'm almost finished bringing my eikon 150 distance riding Replaced battery

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Headlight front signals some fuses; cleaned carbs; repainted. When I received it it was hard to start. Had to kick it into submission and the choke plunger would not stay out. I've since tightened up the choke plunger friction nut and reclamped it towards the carbs (after cleaning the carbs). Problem #1: I can't remember exactly how the clamp is supposed to be positioned on the bottom of the cable: on the metal cylinder? On the indented part of it? And I have a rubber boot on the carb end of it; this boot just slides around and doesn't seem to even fit over the indented end of the metal cylinder. Problem #2: High idle or no start problem: The only way I can get the bike to start cold is to unclamp the cable (tank off) and yank on the cable. As the bike warms up I let the cable go and clamp it down at the point where the choke plate/linkage/butterfly/whatever is completely closed at the carb and no rise in idle is happening. Then I have a nice idle at 1200 +- 100rpm. While the bike starts right up when hot using this setup, it won't start cold unless I go through the rigamarole again. If I clamp the cable in a position so that it will start cold next time, then once the bike warms up and I turn off the choke, the idle falls at 2500rpm. The choke plate is definitely still open at the carb. It almost seems like the cable is wrong for the bike. I seem to need a larger variance in cable length between choke-on and choke-off. I wouldn't be surprised if the previous owners did something funky with aftermarket parts. Help? ,sound like u got both---send it to the mechanic,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the problem? A 2003 FXDX-T with a 2 year old OEM H-D Battery. What should the Volts be on a "fully charged" Battery. I have a reading of 12.4 Volts. At "high idle" the reading is 14.26-27 Volt


With a reading of 14.2 volts at high rev I believe your stator is right on the money.I would say that a new battery is in order.Take the old one out ,charge it overnight,and have them perform a "load test" to confirm before you buy a new one. good luck

May 22, 2014 | 2003 Harley Davidson FXDXT Dyna Super...

1 Answer

Manual free workshop


Hi Anonymous, I am sorry you can't find the first and best tool you ever bought for your Beta but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
Beta Eikon 150 2005 technical specifications
Beta Eikon 4T 150 2004
Beta Eikon 50cc scooter
http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/suhttp://www.lewisportusa.com/manuals.htmpport/manuals

Aug 20, 2013 | 2005 Beta Eikon 150

1 Answer

What is the exact term for the electric fuel shutter that regulates fuel going to the carburator in beta eikon 150 cc scooter?


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
http://www.betamotor.com/en/suhttp://www.lewisportusa.com/manuals.htmpport/manuals
http://www.lewisportusa.com/manuals.htm
Beta Eikon 50cc scooter
Beta Eikon 4T 150 2004
Beta Eikon 150 2005 technical specifications

Aug 06, 2013 | 2005 Beta Eikon 150

1 Answer

2002 sebring 3.0 replaced alternator,02 sensor,battery,and when turning or stopping car dies..starts up fine...seems like idle is low.


when disconnect battery PCM loses memory.it may take day or two or good driving distance car idle should recover.it not let dealership reset idle speed may charge $35.00 .

Apr 07, 2013 | Cars & Trucks

1 Answer

I want to get some spare parts for my scooter beta eikon 150cc


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
beta Sip Scootershop com
Beta Eikon 150 Scooter Spare Parts
http://www.myscooterparts.co.uk/search/variator/0/0/beta-eikon-150 http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/suhttp://www.lewisportusa.com/manuals.htmpport/manuals

Jul 17, 2012 | 2005 Beta Eikon 150

1 Answer

1989 ford f 150 stalls out after running for 10 to 15 min


Disconnect the IAC and set the idle to idle on its own.The reason I say this is the timing procedure deals with disconnecting the IAC to set timing,retest the fuel pressure.

Mar 24, 2012 | 1989 Ford F 150

1 Answer

Owners manual beta eikon


Hi Anonymous, I am sorry you can't find the first and best tool you ever bought for your Beta but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
http://www.betamotor.com/en/suhttp://www.lewisportusa.com/manuals.htmpport/manuals
http://www.lewisportusa.com/manuals.htm Beta Eikon 150 2005 technical specifications
Beta Eikon 4T 150 2004

Mar 06, 2012 | 2005 Beta Eikon 150

1 Answer

I am looking for a part that fits my BETA EIKON 150 CC. I do not know how is called, so I took some pictures of the part. I would like to know where I can buy it.


Hi, Robertojim for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Beta Eikon 150 Scooter Spare Parts
Maxi Scooter Beta Eikon 150 Athena Aftermarket Division
Scooter Parts Beta Eikon 150 LC
https://www.ajsutton.co.uk/spares/chooseModel.asp?make=BETA
http://www.betamotor.com/en/support/manuals

May 17, 2011 | 2003 Beta Eikon 150

1 Answer

After a 2 hour ride out yesterday in daylight,i always turn my lights on to be seen when returned home switched engine off opened garage went to start bike again and completely dead has a data tool duo...


Might have 12.67 volts, but not enough amps to crank engine or light the lights properly. Try putting a charger on the battery, bring it to a full charge. Next, put a load tester on the battery to see if battery is weak or dead cell. If battery checks good, check the charging system. With engine running at idle, put volt meter on battery-read volts, then rev engine to high idle. Volts should climb higher than idle reading.

Apr 18, 2011 | Yamaha YZF Thunder ace 1000 R Motorcycles

Not finding what you are looking for?
2005 Beta Alp 4.0 Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Beta Experts

Mark Schmit
Mark Schmit

Level 3 Expert

1915 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

35320 Answers

Damian Appert
Damian Appert

Level 2 Expert

112 Answers

Are you a Beta Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...