Question about 2004 Benelli Tornado Tre 900

1 Answer

Maintenance How often do I need to change the oil?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

There are several schools of thought on this. Some say you should change your oil every 3000 miles; others say every 6000 miles is fine. In any case you should change it every 3 months.,

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha 650 how change fricction plates and put it back all together included springs


Be carefull to avoid friction reducing oils or any kind, this bike was built well before synthentics so don't think you "must" use the full synthentic oils. Mobile 1 15-50 is an excellent oil, replace the filter while performing maintenance on the plates, you will need 3 quarts of oil. To change the friction plates watch the video some guy made on you tube.

Mar 16, 2013 | 1982 Yamaha XJ 650

1 Answer

Need to do a tune up on a 2006 750 shadow areo!What's involved?


There reall isn't much to do except change the engine oil and filter, replace the spark plugs, and check the air filter. Other important normal maintenance items are; check all fluid levels (brake fluid, clutch hydraulic fluid, coolant level, final drive oil level), and tire pressures. Your motorcycle requires very little in the way of tune-up maintenance.

Nov 01, 2009 | 2006 Honda VT 750 Shadow

1 Answer

No prev exp with bikes. I need to replace the oil and carry out a basic service on my '05 WR250F. Is there a maintenance manual .PDF that I can download for free? Can anyone source me an Idiot's Guide?...


replace plug.gap it properly.change oil use recommended oil.change tranny fluid change filter oil and gas.join a good tamaha forum ask there youll get alot of help.. :]

Oct 10, 2009 | 2005 Yamaha WR 250 F

1 Answer

When do I need an oil change and/or service


call your dealer Jim. You are a bad boy if you went 12000 miles on 1 oil change though.

Aug 03, 2009 | 2005 BMW F 650 CS Scarver

1 Answer

Maintenance


check my write ups on this site about oil changes...Tim

Jun 03, 2009 | 2002 Honda VT 750 DC Shadow Spirit

1 Answer

I need to change the oil and clean the chain


You can buy chain lube at the bike shop...it tell you how on the can. As for changing the oil....good idea, BUT....have someone professionally do that. Cheap insurance, 'cause, if you foul-up Big$$$$$$$!

May 28, 2009 | 1998 kawasaki ZX-6R Ninja

1 Answer

Want to do my own maintenance; oil, brake fluid, etc. Any suggestions on service manual, maintenance dvd..if there is one?


A factory service manual is worth the money if you want to be serious on repairs / rebuilding. I recomend the purchase. DO NOT get a Clymer, Haines, or any other manual that is not a FACTORY service manual. The factory manuals are much more detailed. There are no videos that I am aware of.

Do yourself a favor. Ride to a dealership and ask if they would go over the recommended owner maintenance with you. Have them show you how to do an oil change with a new filter, spark plug change, set the idle speed, Add water to the battery, clean the air filter, bleed the hydraulic systems, check the fuses, change headlight bulbs, adjust the chain, and lube the cables and chain. Purchase chain lube, oil, oil filter and spark plugs from them. Make friends with the dealer. Ask questions; how often?, what quantity?, how do I measure that?, what tells me I need to bring the bike in for maintenance or repairs? A good dealer will be happy to show you knowing you will get parts and supplies from them as well as have them do any major repairs.

Please take a moment to rate this answer. Thanks Louber!

Apr 30, 2009 | 2006 Yamaha V Star 1100 Custom

1 Answer

BMW motorcycle maintenance


to change the oil you need to remove the sump plug, located on the underside of the sump. the plug is a bolt on the botom of the engine. once the bolt is removd, oil will drain out rapidly so have a container ready to catch the oil.once drained put the sump plug back in and refil with new oil.

Dec 05, 2008 | 1994 BMW K 75 S

Not finding what you are looking for?
2004 Benelli Tornado Tre 900 Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Benelli Experts

yadayada
yadayada

Level 3 Expert

60962 Answers

Connie Richardson

Level 1 Expert

15 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Are you a Benelli Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...