Question about 2008 Benelli BX 570

1 Answer

Turn signal problem

I have a benetli bx 750 which has an indicator fault in that the indicator works fine to the right but is dead as a dow dow to the left. I have checked the switch and that is fine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

And the strange thing is that when i turn on the alarm all four bulbs work fine?? That odviously rules out the bulbs and sockets. Any suggestions?? Many thanks turn signal?? check the switch on the bar. its best to take it apart but?? it may not be making a good contact. try spraying some wd-40 in there. dont worry this is good for it. otherwise you can check the voltage from the switchetc to pin point the problem.,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left turn signal quit


Most probably is a short in left light wiring. I'd start at the connection for that side on the fuse box being it dims other lights when it's used.

Jul 22, 2015 | Motorcycles

1 Answer

Right turn indicator stays on


flasher relay under steering column does not work,switched it with hazard and see if it works,then get the new one,make sure the light on turn signal in front or back is not burned out first

Apr 04, 2014 | 1992 Chevrolet Lumina

2 Answers

2001 rav 4 wiring diagram


This is a typica grounding error. You should try to add a good ground cable to your tail light. Sound strange but this often solves such issue:)

Dec 16, 2013 | 2002 Toyota RAV4

1 Answer

I have a 2005 Chevy Tahoe and the hazards come on when I use my left turn signal occasionally. The right turn signal works fine.


hi.

i am not sure if you mean your hazard lights actually come on, or if all 4 indicators come on at the same time.
hazards coming on would suggest a fault in the indicator switch, or a short in the wiring.

all 4 indicators coming on, would suggest a bad earth connection on the rear left side of the vehicle. this is far more likely, and can be cured by tracing the earth wire to teh body of the car, and check for loose, damaged wires, or corrosion at the earth point on the body.

easy way to tell, is to switch on the tail lights at the same time. if these get brighter and dimmer in time with the indicators, it is almost certainly an earth fault.

hope this helps

Jul 12, 2011 | 2005 Chevrolet Tahoe

1 Answer

My indicators have stopped working also the heater


If the the indicator light's illuminate ,when turned on ,the signal flasher is at fault .
Replace it.

Mar 07, 2010 | 1991 Peugeot 405

1 Answer

Turn indicator light flashes quickly. bulbs fine


The quick flash is a fault detection for a burnt out bulb. If bulb is good, check bulb socket. Inspect for corrosion. If needed, replace bulb socket. Check bulb socket connector. Check if fuse. Check emergency flashers ( most cars have a separate circuit).

Jul 09, 2009 | 2000 Ford Windstar

4 Answers

LEFT TURN SIGNAL FLASHING TOO FAST


when a turn signal indicator flashes faster than is normal it is your vehicles way of telling you there is a problem with the lighting system, do a visual check of your turn signals and you will find a burned out bulb. just replace the bad one and it will return to normal

Apr 26, 2009 | 2001 Nissan Maxima

1 Answer

Rear right turn signal acts as a running light. blinker works fine. fwd right and both left turn signals work as advertised.


Make sure and replace the lamp with the exact same one as the working side. Sounds like their is a mismatch in the lamps of some sort.
If one of the filliments is burnt out this will happen. Just like in car blinkers. Or it will blink fast. Hope this helps.. Happy Holidays. Jay

Dec 05, 2008 | 2005 Honda VT 750 Shadow Aero

Not finding what you are looking for?
2008 Benelli BX 570 Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Benelli Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Frank Richardson

Level 1 Expert

19 Answers

Jim

Level 3 Expert

784 Answers

Are you a Benelli Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...