Question about 1974 Benelli 750 Sei

1 Answer

Carb removal I have recently bought a 1975 Sei with 3

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

800Kms on the clock ( It still has the original tyres ). It has never been registered and the Kms were largely done with trade plates from a South Australian bike shop in the 70's before being relegated to the back of the store. The person I bought it from had it 9 years and did little with it. I am not restoring but trying to fix the things needed to get it right and as close to original as possible.I need to remove the carbs to clean them properly. I am not sure which way the come out. It seems like I will ruin the old connection rubbers if I keep going the way that I am. What is the go? Also did this model have metal spark plug caps and is there anyone out there with the original fuel hose set up for sale? RegardsI have to say getting the carbs out on the 900 is a bit of a pig. The rubbers tend to go hard too. Not sure if this is exactly the same as on the 750 but what you can do is take out the battery disconnect the bits from the battery try and remove that, take out the air filter and its rubbers and then you have room to get the carbs back. Alternatively, if you want to get them off without taking the air box out, remove the rubbers between the air box and carbs first - try and wriggle them back into the air box - you can rescue them later from the other side (take the air filter out). This should give you enough room too. Hope that helps!,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. I have recently bought a GT380, however, it's not running right. It starts fine and runs, but only on 2 cylinders. Carbs have all been ultrasonically cleaned, take the plug out and lay it on the head...


just coz you put youre thumb over the hole and you have compression does not mean that you have good compression find out what the maximum pressure is supposed to be and get a porper compression tool.
oil from the exhaust is odd i think this could be v/v guides but it would not explain why exhaust is not getting hot.

Sep 26, 2013 | 1975 Suzuki GT 380

1 Answer

Put new distruber in my 1975 ford 351 m I can get


Backfiring through the carb is a timing problem. I would bring it back up to top dead center and reinstall the distributer. Also double check your firing order on your plug wires.

Sep 11, 2013 | Cars & Trucks

1 Answer

HOW TO REBUILD BENDIX CARB 1975 FXE


Hi Anonymous, it's too bad you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below and good luck. Harley Davidson Manuals Mark Workshop

Jul 16, 2012 | Harley Davidson FLHT Electra Glide...

1 Answer

I bought a Guzzi V500 mk 3 recently with very low mileage. It starts fine on the choke, runs ok but after a run, if it stalls it wont start, I guess its a hot start problem. Its got a new battery, fuel is...


Your issue is with your carbs, due to the prolonged sitting they have become gummed up and are causing your issue. I recommend removing them, completely disassembling them, and soaking in a quality carb cleaning solution, overnight.

Apr 29, 2011 | 1985 Moto Guzzi V 50 III

1 Answer

My husband owns a Benelli 750 Sei and would like some instructions for removing a starter motor


Hello, first remove the chrome cover over the starter, remove the left cover and clutch cable. Disconect wire from starter, remove the top nut and bolt and the bolt on the rear (sheet metal) starter bracket, pull starter straight out past the seal. Hope this helps, Frank

Nov 16, 2010 | 1974 Benelli 750 Sei

1 Answer

I am looking for a wiring diagram for a 750 sei. (Rear light stays on all the time and horn doesn't work from the switch)


Hi, James720 I am sorry you can't find the first and best tool you ever bought for your Benelli but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
How to fix your motorcycle horn or any basic electromagnetic horn
Fixing Motorcycle Horn Circuit
Brake lights stay on
taotao scooter brake light fix part 1
https://dl.dropboxusercontent.com/u/35177464/SEI%20750/Benelli%20750%20SEI%20Manual.pdf



Jul 14, 2010 | 1974 Benelli 750 Sei

1 Answer

Oil type


10W-40 15W-40 etc As I am unable to tell how long the existing oil has been in the bike should a flushing oil be used befor changing the oil? Any help/suggestions/advice would be appreciated. Regards, ,according to 900 Sei WORKSHOP MANUAL Additions and changes to the workshop manual for 500 Quattro-750 Sei whose print date appears to be 2-80, AGIP SINT 2000 SAE 10 W 50 oil is to be used for the engine. I drained the oil and changed the filter on my 1979 750 with 380 miles on it last May. I bought the bike new but haven't used it since 1993. The oil and filter were again changed after 12 miles. regards,,,

Nov 10, 2008 | 1984 Benelli 900 Sei

1 Answer

Carb removal


800Kms on the clock ( It still has the original tyres ). It has never been registered and the Kms were largely done with trade plates from a South Australian bike shop in the 70's before being relegated to the back of the store. The person I bought it from had it 9 years and did little with it. I am not restoring but trying to fix the things needed to get it right and as close to original as possible.I need to remove the carbs to clean them properly. I am not sure which way the come out. It seems like I will ruin the old connection rubbers if I keep going the way that I am. What is the go? Also did this model have metal spark plug caps and is there anyone out there with the original fuel hose set up for sale? RegardsI have to say getting the carbs out on the 900 is a bit of a pig. The rubbers tend to go hard too. Not sure if this is exactly the same as on the 750 but what you can do is take out the battery disconnect the bits from the battery try and remove that, take out the air filter and its rubbers and then you have room to get the carbs back. Alternatively, if you want to get them off without taking the air box out, remove the rubbers between the air box and carbs first - try and wriggle them back into the air box - you can rescue them later from the other side (take the air filter out). This should give you enough room too. Hope that helps!,,,

Nov 10, 2008 | 1985 Benelli 900 Sei

Not finding what you are looking for?
1974 Benelli 750 Sei Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Benelli Experts

yadayada
yadayada

Level 3 Expert

63481 Answers

Connie Richardson

Level 1 Expert

15 Answers

Jim

Level 3 Expert

767 Answers

Are you a Benelli Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...