Question about 2006 Bajaj Wind 125

1 Answer

Clutch cable

So i bought a wind 125 . Its my first bike ever

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

And yesterday was the first time i ever went on a bike. After a couple of hours of riding it around my neighborhood my clutch cable snapped. Im guessing the cable itself is not very expensive but i was wondering if anyone could give me some tips on how to replace it. ALso i can't figure out how to take off the seat. haha thanksSugestion 1: Get a service manual and owners manual, they would answer your questions. Now, to get the seat off, check in the trunk. The little door on the rear of the bike, I believer the xjs have wingnuts in there that hold the seat down. In terms of the clutch cable, you may need to remove the clutch lever to get the cable off that side, on the other side you probably need to remove the clutch cover on the engine (near where the chain goes into the engine) and remove the cable from there.,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 YZ 125 clutch assembly problem


Hi, Moto582 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yz 125 clutch repair part 1
2005 yz125 clutch rebuild my first clutch replacement Yamaha 2 Stroke
YAMAHA YZ125 Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jul 10, 2012 | 2005 Yamaha yZ 125

1 Answer

Why would the clutch cable on my yz 125 2007 just go slack


Clutch cable or lifter broken

Ride Safe
Bike-Doc

Jan 31, 2012 | 2007 Yamaha yZ 125

1 Answer

Hi i am looking at buying a honda nsr 125. There is one that needs a new clutch cable and and throttle cable from brake pipe. could you tell me how much a honda dealer would charge to repair this? thank yo


I would not buy the bike until the current owner fixes it. Then you can test ride the bike before buying it. For all you know, the transmission and clutch are trash. Please rate my answer. Thanks.

Apr 24, 2011 | 2000 Honda NSR 125

1 Answer

I have one bajaj wind 125 - the wiring is damaged and CDI unit is getting heated while trying to start the bike. Can anyone help me to get a wiring diagram of wind 125. Thanks


Hi Animesh, I am sorry you can't find the first and best tool you ever bought for your Bajaj but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
Manual Kawasaki Bajaj Wind 125 Documents

Sep 20, 2010 | 2005 Bajaj Wind 125

1 Answer

Kx 125 2003


im pretty sure that the bike is a all in one menin that oil in tranny is same that flows in motor

Jul 22, 2009 | 2003 kawasaki KX 125

2 Answers

'95 Yamaha YZ 125 clutch - stays in gear when clutch is pulled in


the plates will stick to each other because of oil
check the clutch lever at the motor and make sure it is moving the arm that pushes the pressure plate and make sure it is moving

Apr 15, 2009 | 2003 Yamaha YZ 125

1 Answer

Clutch not fully disengaging


You have either air in your hydraulics which you need to bleed or else the clutch plates are worn/warped....here is the repair manual....
rate me if I've helped you. Thanks.
http://www.carlsalter.com/download.asp?fileid=075084077095049050053045050048048046040083088046077067088046069067088041095050048048049046112100102

Apr 03, 2009 | 2003 KTM SX 125

2 Answers

Engine cuts out


your clutch is draging adjust the clutch cable so that when you are on the bike with the bike off and in gear and clutch pulled in you can move the bike freely that means the clutch is engaged

Dec 30, 2008 | 2002 kawasaki KDX 125

1 Answer

Clutch basket


but it was not as deep as the original. Did the older bikes have a sallower basket. Mine is a 2005 and holds 8 fibers and 7 steel plates. I can't find any partd lists for the older bikes on the web. First a question. Are you using the original clutch fiber plates and friction disks or, did you get a new pack of plates and disks to go with the new basket. I'll explain my question below. The clutch on the 125 is sort of touchy. I tried various configurations, mainly using all steel drive plates, instead of the combination of steel and aluminum. I was only able to make it work properly using the OEM GG configuration. The 125 uses a different clutch than the larger bikes. (The 200's clutch basket has a different gear on the back, but otherwise it's clutch is the same as the larger bikes.) Make sure your replacement clutch disks & plates are not for the larger bikes. (I recently saw an ebay seller's auction that claimed to be a clutch rebuild kit for the GasGas bikes. It only had 7 friction disks. ) The original clutch for the 125 Gasser had a combination of aluminum and steel drive plates. The friction plates were all the same. The 2005 parts book lists them as being 3 iron disks and 4 aluminum disks. (In my memory, I thought it was 4 steel and 3 aluminum.) If you download and look at the parts book, http://www.gasgasmotos.es/rcs/manual...emotorec05.zip , the 125 clutch is on one of the last pages of the book. (page 48 of 50) BTW. I still have a new OEM GasGas 125 clutch pack in my stock; if anyone is interested. (side note: The clutch push rod for the 125 is only a few dollars. The clutch push rod for the larger bikes is in the $35 range.),,,

Nov 10, 2008 | 2007 Gas Gas EC 125

Not finding what you are looking for?
2006 Bajaj Wind 125 Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...