Question about 2004 Bajaj Caliber 115

1 Answer

First gear issues

As you all know

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Last April my bike was in a crash. It went in for repair and has been unridden since then. (Because my injury prevented me from riding) A week and a half ago I put my bike on the road and have been doing some short rides. First gear is giving me grief. When I come to a stop it often won't go into first; or; it goes into first and then slips back into neutral; or; if I start in 1st let's say in a parking lot and I'm maneuvering slowly to get into position to exit the driveway it will suddenly be in neutral. I have been coming to a stop and put it into first and saw the light go dark; while I am sitting at the red light it will slip into neutral. Then.....sometimes I can't get it to go into first without a lot of effort. What do you think is the problem? Poorly adjusted from when the bike was in for repair?Which side did it go down on? Likely just a misadjusted clutch or shift lever. If not it could be worse then that... bent shift fork (yikes). Check your clutch lever freeplay and then your shiftshaft area for any signs of damage.,,,

Posted on Nov 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 oldsmobile bravado want back up but will go forward

Sounds like a transmission or shift lever issue. Will it go into the R gear (or is this a stick shift?) My best guess on your issue is that a gear tooth or entire gear (some are made of plastic) may have broken in the gear box or in your automatic transmission. Unless you know how to repair a car, this sounds like a job for your local (and one that you trust -- or the nearest one if it's an emergency) repair shop to deal with for you.

Oct 07, 2014 | 2000 Oldsmobile Bravada

1 Answer

A200, 1st gear had no torque(I could stop by hand). Found & replaced key on low speed gear. It sheared it again. It is just shearing it on the flat gear part, not the bevel gear part. I'm thinking it...

I have had my Kitchen Aid since 2003 and never had this problem. If this has happened to you more than once, I would call Kitchen Aid and explain the issue to them. My sister had an Issue with her new Kitchen Aid and they had her bring it for service and they replaced it with a NEW mixer. Kitchen Aid is very good with brand accountability.

Mar 01, 2014 | Hobart Food Mixers

2 Answers

2005 chevy silverado no 2nd gear

Is it automatic...?
If so. Stuck valve. It's kind major issue.


Mar 12, 2013 | Cars & Trucks

1 Answer

Gears/clutch 1994 mazda protege

it needs to have the air bled from the hydraulics properly

May 15, 2017 | 1994 Mazda Protege

2 Answers

My 2001day Ford Escape XLT has check engine light on. The parts store pulled the codesand its a gear 3 ratio issue and a miss fire on first and second cyl. Could these two be related or does the gear ratio...

Gear ratio does point to an internal transmission issue. The misfires can easily be diagnosed by swapping thing around and seeing if the code follows. For example misfire in cylinder number 1 & 2 swap coils to cylinder number 3 & 4 and if the code changes from P0301(2) to P 0303(4) you know you need coils.

Feb 25, 2013 | Cars & Trucks

1 Answer

2002 range rover all of sudden does not engage in gear and shows gear box fault. Was driving and running great this happened with no warning.

Happened to mine... auto transmission rebuild AUD4800 and still having issues with Torque Converter ..... sorry I know its an old posting... also issues with pressure build up in auto transmission

Nov 01, 2010 | 2002 Land Rover Range Rover

1 Answer

Headlights only work when car is in gear

If you are stating the headlights only work while in gear (during the day or night) then they are your daytime running lights. Don;t know if you vehicle has automatic headlights or a manual switch. If you are stating you turn the headlights on and they only illuminate while in gear then there are other issues. Let me know

Aug 16, 2010 | 2006 Pontiac Torrent

3 Answers

Clutch or transmision

have it inspected, codes may be stored to help in diagnosing. an engine issue could cause this if a sensor is bad.

Nov 11, 2009 | 1997 Toyota Tercel

1 Answer

Auto transmission gear not engaging

Could be oil pressure issues or a worn cluth or almost any sort of electronic failure

Jun 12, 2017 | BMW 325 Cars & Trucks

Not finding what you are looking for?
2004 Bajaj Caliber 115 Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides