Question about 2003 ATK 605

1 Answer

Fuel leak hi i have an atk 605 that iam having a big problem with the bike starts and sounds like nothing seems to be wrong inside the motor but outside is a diffrent story after the bike starts it starts to leak fuel and i mean alot lol so i looked around to find out where all of the gas was coming from and its come out of the crankcase breather me my self i have never seen gas pour out of the crank breather iam thinking that iam going to have to rebuild the motor but may be this has happend to someone eles and may be a quick fix any suggestions or ideas to what could be the problem iam all ears thanks so much

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Wait... fuel is pouring out of the crankcase breather? Are you sure it's not the carb overflow tube? The crankcase breather should be going back into your airbox or through some kind of filter. If gas is coming out of there DO NOT START YOUR BIKE. It means that gas has gone from the tank through the carbs into the cylinder and is now in your oil. Thinned out oil is the devil for bikes. Sounds like you'll need to clean the carbs and set the float bowl height and maybe rebuild the petcock. Check to see if any fuel is coming out when the petcock is turned off. If it only has on pri and reserve then check for gas in the vaccum tube.,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2011 klx 110 that is leaking gas out the overflow tube. What could the problem be?


Hi, Anonymous and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. Worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
For more information about your issue please visit the websites below. Good luck and have nice a day.
ATKustom

Sep 12, 2013 | 2003 ATK 605

1 Answer

I need a atk 605 rotax manual


Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your ATK but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
http://www.atkusa.com/parts/parts

Mar 18, 2012 | ATK 605 Motorcycles

2 Answers

I have a 1991 rotax ATK 406 dirt bike and won't run right


try cleaning the fuel filter, it may be as simple as that

Jul 12, 2010 | ATK 125 2-stroke Motorcycles

1 Answer

My atk 450mx stalls often


clutch cable needs adjusting its still engaging whilst when you stop by sounds get back to me if its wrong i have other optons

Oct 12, 2009 | 2005 ATK 450 Mx

3 Answers

Atk 605 94' starter problems. with sparkplug out motor spins fine, with plug back in, the starter wants to kick out under load. have removed starter,it's good. this is not a bendix type starter. p.s. works...


you have a bad starter sprag clutch, 500 us dollars,  it is posible to replace the spring that is most likely worn with one from a crank shaft seal, call kieth at american dirt bike he is very helpfull

Jun 10, 2009 | ATK 605 Motorcycles

1 Answer

Timing belt adjustment


recheck timing marks to align up..
I hope you did not rotate motor with timing belt removed or while working on clutch !!
If you did you need to take it in to a bike shop to get reset or you could bend valves or lots of other things>>

Jan 28, 2009 | 2003 ATK 605

1 Answer

Rear wheel


The best I can find is this post from MAZ. http://forums.cannondaler.com/viewtopic.php?p=65726&highlight=rear+wheel+honda#65726 I've seen other posts that say that ATK told them the rear wheel was a 605 wheel turned around just as you mention. If it's as easy as getting a 605 and buying spacers from ATK let us know

Nov 10, 2008 | 2004 ATK 620 Intimidator

1 Answer

Fuel question


I replied...Then he went on to tell me I have to get the bike rejetted...On cars you only rejet carberators...How do I rejet/configure my bike if I decide to get exhaust and intake? on a fuel injected bike you get a fuel mapper (kinda like putting a chip in a car) cobra makes a decent one that's reasonably priced. it changes the parameters in your ecu to accomodate the pipes and intake,

Nov 10, 2008 | 2003 ATK 605

1 Answer

Space on atk 605 tripple clamps


as in offsets and more importantly the steering heed shaft diameter in the triple clamps (the middle hole where the shaft goes through the frame).INSTRUCTIONS: Click a bike to see the list of triple clamps for that brand. Use our Sales Page to send product orders. tri-star racing.com Cannondale Fits Model Configuration Price X440 2003 Top-Only $252.00 Bottom-Only $145.00 Complete-TopBottomStem $457.00 X440s 2002 Top-Only $252.00 Bottom-Only $145.00 Complete-Top,Bottom,Stem $457.00 Offsets Available 24mm(std), 22mm, 20mm,,,,

Nov 10, 2008 | 2003 ATK 605

1 Answer

Fuel line system 605


then turn it on when it starts to run out of gas. I believe the additional fuel is flooding it. How do I compensate for this problem? Since the injectors regulate the fuel flow to the motor it's not likely the fuel line update is causing your problem. Possibility of a manfunctioning injector IACV or air restriction on the intake side.,,,

Nov 10, 2008 | 2003 ATK 605

Not finding what you are looking for?
2003 ATK 605 Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATK Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Fabrice Wolters

Level 2 Expert

162 Answers

Are you an ATK Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...