Question about 2002 Aprilia RSV Mille Haga

1 Answer

57mm TB switch

What mods need to be done to 04+ rsvr 57mm TB's to be installed onto an 2003? I know a couple people have done this. Want to know if there is any problems with this or should i just pick up a set from the Edwards edition? Looking for no trouble installation. Also Have to change to shorter stacks? Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

If you can get the Edwards TB that is the easiest way to go. Here are some threads on adapting the 04 units. ,

Posted on Nov 10, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the turn signal relay located on a 2003 Yamaha r1

Hi, Eddie for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
OEM parts for Yamaha

Jul 03, 2012 | 2003 Yamaha YZF-R1

1 Answer

Looking for decals for a 2003 rsvr 1000 the old shape, the bikje is diablo black.

The Aprilia code for decals is: AP8177243
Costs about 130.00 euros in Italy.
You can order here:
Best regards,
PS-Don't forget to vote me, thanks!

Oct 12, 2010 | 2003 Aprilia RSV Mille R

1 Answer

2003 WR250F, exhaust gets red hot very quickly?

souds like a lean condition,have you rejetted carb or modified the air box ? or changed exhaust,if so you need a larger main and possible pilot jet.If you only notice it at night,maybe normal if you havn't done any mods....

Apr 06, 2010 | 2003 Yamaha WR 250 F

1 Answer

03' Aprilia Mille RSVR Factory stalling

Hi, Willcote1 the following applies to carbureted also fuel injected models and the usual suspects are:
1. Severely discharged or a damaged battery, 9 volts or lower.
2. Faulty alternator/generator and or voltage regulator.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Faulty main circuit breaker or ignition switch, check for loose connections and continuity.
5. Faulty system and or ignition relay, check for continuity.
6. Faulty ignition coil, ignition/electronic module.
7. Faulty CKP, CPS, CMP, MAP, TPS, O2, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Water or dirt in the fuel system, carburetor or filter.
9. . Restricted, blocked or kinked fuel line.
10. Fuel tank empty.
11. The gas cap is not venting properly or fuel tank venting system blocked.
12. A faulty Fuel Pump, pressure regulator and or fuel injectors.
13. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
14. Needle and seat stuck closed in the float bowl.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
DOWNLOAD 2003 Aprilia Rsv Mille Factory

Nov 07, 2009 | 2003 Aprilia RSV Mille R

1 Answer

How ot install easy pull clutch flstic 04

It depends on the type of unit you have. If you know who made it, you can usually download installation directions from their website.

Sep 26, 2009 | 2003 Harley Davidson FLSTCI Heritage ...

4 Answers

Noise from cams in royal enfield avl engine

I have TB and I also had similar problem, expended almost 6000 bucks on fixing but nothing helped me. Then I got the half engine changed so that engine number should be same as in RC. Now it have cast iron engine on to and half AVL, it runs gud, have nice traditional sound, without any sound , no maintenance (if I companre with AVL), consume more fuel (who cares?) all in all it runs like royal.

But remember its a tough job and U need a gud expert for this who had earlier done this. If you need any help you can contact me.

Mar 31, 2009 | 2007 Enfield Bullet Electra

1 Answer

2006 999 motor upgrades

Nichols lightweight flywheel. Nemesis ecu +3 520 conversion Carbon BST's if you can afford them, apparently a world of difference. You're close to me, if you want to check out my setup to see let me know. Besides that, cam timing/squish and a overbore/head modification by Ducpond might be nice too.

Nov 20, 2008 | 2005 Ducati 999 R

1 Answer

Leaking Coolan

the water pump seals on the pre 04 bikes was to do with oil leaking believe it or not, rather than coolant, i'd check the hose clips and make sure the bottle isn't too full, or bleed the system, let it cool down and check the level under the main cap, may have been an air lock? just guessin'

Nov 10, 2008 | 2008 Yamaha Gladiator

1 Answer


For more power you can port the engine but I would start with performance Reeds. Also would adjust suspention and revalve if needed. That would be it for me…,,

Nov 10, 2008 | 2003 HM CRE 250

1 Answer

Sachs shock

No between 03 and 04 the shocks are quite different. You need one from an 01-03 Mille or 02-05 Tuono,

Nov 10, 2008 | 2000 Aprilia RSV Mille SP

Not finding what you are looking for?
2002 Aprilia RSV Mille Haga Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts


Level 3 Expert

67800 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides