Question about 2006 Aprilia Leonardo 125

2 Answers

Fuel Gauge Problem

Aprilia Leonardo 125

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a fuel gauge indication problem , the tank would always read full. This was resolved by measuring the resistance on the dash board printed circit, it was high so I soldered a small length of cable between the high reading path. The tank contents reading is now accurate.

Posted on Jul 17, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Hi I hope it is ok for me to write on this forum in english! I have some problem with the fuel gauge on my Aprilia leonardo I have measured the resistance on the terminals of the fuelsensor and it does not look to good. Any of you all had any similar problem is it difficult to remove the sensor? ,normal it is not the resistor, it is a contact problem. did you check all connections ,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Correct tyre pressure chart


Hi Anonymous, tire pressure is stamped on the side of the tire and I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/2006+aprilia+leonardo+125

Jul 02, 2014 | 2006 Aprilia Leonardo 125

1 Answer

Need to know setting for airscrew onthe carb of aprilia leonardo 125


Hi Anonymous, I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
Scooter Moped Carburetor Adjustment
DOWNLOAD Aprilia Leonardo 125 Motorcycles

Apr 14, 2014 | Aprilia Leonardo 125 Motorcycles

1 Answer

Leonardo 125 mixture screw settings please


all motorcycles and cars the fuel mixture settings are
1 1/2 to 1 3/4 turns out
some carburetors are pre set and cannot be adjusted
if this is the case then you will have to replace your carburetor

Apr 14, 2014 | Aprilia Leonardo 125 Motorcycles

1 Answer

94 k1500 shakes 40 50 mph


Hi Paul, first of all fix the broken pipe then put in a fresh tank of fuel and I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD 2004 Aprilia Leonardo 125

Apr 03, 2014 | 2004 Aprilia Leonardo 125

1 Answer

Wiring diagram


Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/2005+aprilia+leonardo+125

Sep 17, 2013 | 2005 Aprilia Leonardo 125

1 Answer

My aprilia leonardo 125 wont start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/2005+aprilia+leonardo+125

Mar 17, 2013 | 2005 Aprilia Leonardo 125

1 Answer

Aprilia leonardo 125 2000 fork oil capacity


Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD 2000 Aprilia Leonardo 125

Jun 08, 2012 | Aprilia Leonardo 125 Motorcycles

1 Answer

My aprila leonardo 125, takes ages to respond to the throttle when 1st started. then takes ages to reach 50mph. iv been told the carb needs cleaning, bu then heard it could be a crack in the air in take...


Hi, Danny and the usual suspects are:
1. Throttle cables misaligned or misrouted (may also affect idle speed).
2. Damaged or restricted fuel tank venting system.
3. Inlet system air leak.
4. Vacuum piston malfunction.
5. Accelerator pump leaking or no output.
6. Plugged bowl vent.
7. Fuel level in bowl too low.
8. Restricted fuel supply passages.
9. Plugged jets or passages.
10. Worn or damaged needle or needle jet.
12. The enricher valve not seated or leaking.
For more information about your issue please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/2005+aprilia+leonardo+125

Aug 04, 2011 | 2005 Aprilia Leonardo 125

1 Answer

Where is the waterpump on my aprilia leoanrdo 125 thanks


Hi, Tupacthuglif I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/2006+aprilia+leonardo+125

May 10, 2011 | 2006 Aprilia Leonardo 125

1 Answer

What are the valve clearances on an Aprilia leonardo 125 (1998)


Hi, Gambothejamb I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD 1998 Aprilia Leonardo 125

Mar 17, 2011 | 2005 Aprilia Leonardo 125

Not finding what you are looking for?
2006 Aprilia Leonardo 125 Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

yadayada
yadayada

Level 3 Expert

69199 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...