Question about 2000 Alfer VR 2000 Supermoto

1 Answer

SPARK how do i chick for spark on my VR bike

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Connect your tester to the big thick spark plug lead and crank the engine. You should see a nice big fat blue spark. If you don't disconnect the engine kill button. If there still is no spark you will need to determine if the engine has points or electronic ignition. Most (but not all !) bikes built before 1980 have points ignition. Most bikes built after 1980 (but not all !) have some sort of electronic ignition system. If in doubt pull one of the crank end covers (Usually 2-3 screws) and look ! If you have a battery and coil points system see the points page If you have a points magneto system see the Magneto page. If you have an electronic ignition system see the electronic ignition page. ,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No spark no injector pulse


No Start, No Spark, No Injector Pulse (faulty crank sensor ...

? 35:19
https://www.youtube.com/watch?v=EBABtCi_YQ4
Jun 3, 2014 - Uploaded by ScannerDanner
No Start No Spark Case Study 1997 Lincoln Continental 4.6 How to test a VR type crank sensor. (VRS) This ...

NO START,NO INJECTOR PULSE Thanks Paul Danner ...




Nov 25, 2015 | Cars & Trucks

2 Answers

Theres no spark and bike wont start


you will have to check lead to spark plug then lead to coil
if your not getting spark at plug it could be a number of things ingintion
or just a loose wire best of luck hope you solve it

Mar 15, 2014 | Pit Bike 125cc 4 Stroke Dirt Bike

1 Answer

The bike has no spark going to the sparkplug. it has a kickstart and it also has a switch on the left hand side of the bikes handle bares. its also a thumpstars but i couldnt find it on the list.


i would check the coil packs a old school way to do that is to take the the spark plug wire off the spark plug put a screw driver in it with any thing but a metal handle in it and then touch the frame of the bike with the screw driver still in the spark plug wire and try to start it . if there is a spark the coil is good and to test the spark plug simply take the spark plug out the cylinder head connect it to the spark pug wire and trie to start it if see a spark comeing from the spark plug is also good

Jun 22, 2011 | Yamaha Raider Motorcycles

3 Answers

2001 yz 426 spark plug


Remove plug then reinsert top cap only let plug hang free now kick over starter wile somone watches the plug for spark (the darker the better!)

Dec 17, 2008 | 2001 Yamaha YZ 426 F

2 Answers

Battery


Sorry to hear that you have no spark on you bike. Just a quick thought have you measured the battery voltage could your charger have damaged battery. I over charged my battery last year ( would only produce 8V) and had to get a new one along with an Optimax 3 charger so it would not happen again.,,

Nov 10, 2008 | 2005 Hartford VR 200H

1 Answer

Leaking compression on my VR


check the valve clearance to see if one of the valves is tight To figure out whether it's the rings or the valves try this. Lock the crank with a wrench with the piston at TDC (Top-Dead-Center) and run some compressed air in through the spark plug hole. Make sure you have a good hold on the crankshaft wrench or the engine will spin throwing the wrench off ! Now listen. If you hear air coming out at the carb or air cleaner the intake valve is leaking. If at the exhaust pipe, it's the exhaust valve. If at the engine breather, it's the rings. ,,,

Nov 10, 2008 | 2000 Alfer VR 2000 Supermoto

Not finding what you are looking for?
2000 Alfer VR 2000 Supermoto Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alfer Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

kakima

Level 3 Expert

102366 Answers

Are you an Alfer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...