Question about 2004 kawasaki VN 750 Vulcan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you plan to modify your exhaust system you will have to rejet your carbs to compansate. kits are availableat most aftermarket shops.
Posted on Mar 24, 2009
you must have a fault with the sensor buddy replace this or the connections are not in correctly or is this the oil pressure light
Posted on Sep 05, 2009
Firstly run your engine till you reach its normal running temp .The engine drain plug will be found under neath the engine normally at the lowest part .Warm oil drains out of the engine much more quickly that cold oil ..when all the oil stops dripping then remove the oil filter ,make sure that the sealing ring is removed ,take care the oil in the filter will be very hot .replace with your new filter make sure you do not cross thread the oil filter unit and any seals have been fitted . Refit your drain plug and fill up to the required level . start engine ,your oil level will drop because the oil filter will fill up and the new oil will be pumped around the engine. make sure that the engine level is topped up when all the oil has reached all the parts of the engine .Do not over fill the engine as this will cause unwanted pressure .and oil leaks .Remember to replace the oil filler cap and that its tight .
Posted on Mar 14, 2010
Tips for a great answer:
Oct 29, 2015 | kawasaki Motorcycles
Apr 09, 2014 | 2004 kawasaki VN 750 Vulcan
Jun 27, 2012 | 2005 kawasaki Vulcan 750
Aug 05, 2011 | 2004 kawasaki VN 750 Vulcan
May 19, 2010 | 2004 kawasaki VN 750 Vulcan
Sep 05, 2009 | 2004 kawasaki VN 750 Vulcan
May 14, 2009 | 2004 kawasaki VN 750 Vulcan
95 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: