Question about Motorcycles
I need the wiring diagram for a hensim 150cc motor (for a dirt bike)
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi and welcome to FixYa,
To my knowledge, there would only be 3 wires needed from the handlebars that affects the engine:
As to the ignition coil, 1 wire is IGN B+12 while the other would go to the CDI and should pulsate when cranking or engine running.
Good luck and thank you for using FixYa.
Posted on Feb 01, 2009
SOURCE: wiring diagram for bike
You can go to your local dealer and they usally will copy it out of ther service manuel for you.When you say passing lights do you mean highway lights?
Posted on Mar 29, 2009
take off the 4 bolts on the head after you unplug the spark plug. then take out the c clips that are on the side of the piston where it connects to the crank oh ya if the cylinder wall is scarred then you will need to repair or replace it, but if not then keep following after you take out the clips the piston should come off im assuming you bought a rebuild kit now take the new piston and place the ring(s) on it then put the piston on the rod then slide the shaft inside the piston then put the new c clips on each side then place the cylinder on top of the piston (you will have to clamp the rings together with a special tool but if you dont have it your fingers will work fine then after you get the cylinder on you can put the bolts back in place then the spark plug wire and remember to break in the new top end by driving in first gear for a few hours.
Posted on Jul 21, 2009
i have a 2000 road king classic, last week i laid it down and the bike blew a couple of fuses, replaced them and the bike started, but i do not have any speedo lights and odometer, no power to the guage, also no blinkers, they light up but does not flash, also the right hand grip was rolled down, could this be the problem ?.
Posted on Nov 10, 2009
Tips for a great answer:
Jul 25, 2017 | Motorcycles
Feb 12, 2017 | 2011 Bajaj Pulsar 150
Nov 18, 2016 | Jonway Motorcycles
Jul 04, 2016 | Motorcycles
Dec 26, 2015 | Motorcycles
May 30, 2015 | ATVs
Nov 29, 2012 | Yamaha Motorcycles
Aug 16, 2012 | Motorcycles
Oct 29, 2011 | Motorcycles
34 people viewed this question
Usually answered in minutes!