Question about Motorcycles

Open Question

Gsxr 1000 k7 error code C40

F1 flash, code C40 but the bike run?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Can you change temp from F to C on a GSXR 1000 K7

According to the user's manual, press SELECT until you see the odometer screen then hold down both SELECT and ADJUST for at least 3 seconds or more. That should change it. Now, their is another problem that you may not be aware of, and that is if that bike is a Canadian one, it may not change. it is my understanding that the US models and EUROPEAN ones are the only ones that can change. Try this, and if it does not change, you are out of luck.

Posted on Dec 06, 2008

Ad
  • 26 Answers

SOURCE: How fast does a Suzuki GSXR 1000 go?

Most sports bikes are limited to 300km/h by the manufacturers in an effort to be responsible. Actually the ? was about the 1000 not "most sport bikes". The Suzuki gsxr1000 for 2007 is rev limited to 184 mph. U do the math to figure out kph but in the U.S. who cares about the metric numbers.

Posted on Apr 24, 2009

polarcycle
  • 1392 Answers

SOURCE: f1 displayed

The FI light is letting you know there is a problem with the Fuel Injection system on the bike. You will most likely need to take it to the dealer and have them diagnose it with their computer. You can check your fuses and make sure they are intact, but most likely dealership problem.

Posted on Jul 16, 2009

  • 2 Answers

SOURCE: I HAVE A SUZUKI GSXR 1000 K4 A FAULT CODE F1 AND

I have the same problem. I have heard that its an error that happens to a lot of Suzukis. It has something to do with the feul injection and it shouldnt effect the performance. Its just a matter of going to a bike shop where they can hook their computer and clear the fault.

Posted on Aug 11, 2009

  • 3567 Answers

SOURCE: suzuki gsxr k6 600 fuel injectors problems

The display is really FI as in Fuel Injection. The fuel injection computer has sensed a fault in the Injection system. You will need to ride the bike to a dealer and have them read the fault codes. It is probably just something minor. Major faults will not allow the bike to run. You will not hurt the bike if you ride it.

Can I get a “very helpful” rating on this answer?

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've got a k6 1000,the f1 code comes up and when that does the bike goes off a cylinder,when I turn the bike off it goes back to normal again, any help would be great thanks


Hi, Adrian for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
FI Fault Code List Dealer Mode Switch GSXR com
gsxr f1 codes
http://www.manualslib.com/manual/904423/Suzuki-Gsx-R1000.html
OEM parts for Suzuki

May 15, 2016 | Goes Motorcycles

1 Answer

How to fix the -C40 code


C40
Idle speed control valve (ISC valve)...
Will your bike start without the clutch pulled in? Sometimes aftermarket levers do not actuate the pin as needed.
Wouldn't hurt to pull apart and clean all electrical connectors, inc the ones under the airbox.

Dec 09, 2012 | 2007 Suzuki GSX-R 1000

1 Answer

F1 code on my 05 suzuki gsxr 750


I HAVE A 2005 GSXR 750 AND WHEN IM AT HIGH RPM THE BIKE SHUTS OFF. DOES THIS HAVE ANYTHING TO DO WITH THE FI CODE BLINKING? BUT THERE ARE DAYS WHEN IT RIDES FINE....WIERD

May 13, 2012 | 2005 Suzuki GSX-R 750

1 Answer

07 GSXR 1000 F1 light


That is a factory problem with the brain box,It is a trouble code from fuel injection...Most have it.It should not affect proformance

Jul 16, 2009 | 2007 Suzuki GSX-R 1000

1 Answer

I HAVE A SUZUKI GSXR 1000 K4 A FAULT CODE F1 AND THE RED LIGHT IN THE TOP RIGHT HAND CORNER STAYS ON


I have the same problem. I have heard that its an error that happens to a lot of Suzukis. It has something to do with the feul injection and it shouldnt effect the performance. Its just a matter of going to a bike shop where they can hook their computer and clear the fault.

Jul 06, 2009 | 2004 Suzuki GSX-R 1000

3 Answers

Gsxr 1000 k1 wont start lights horn etc come on f1 light flashing will not turn over as if starter not kicking in dont no how to get fault codes up can here system kicking in wen turning ignition on but...


you need to ground your starter to see if is good or if it is your solenoild check all fuses first then take a rubber handled screw driver and touch the hot to the frame or a groun if the starter spins then your solenoid is bad or a fuse but more than likley the solenoid is bad

Jun 22, 2009 | 2001 Suzuki GSX-R 1000

3 Answers

How fast does a Suzuki GSXR 1000 go? 2002 gsxr 1000r started fine loaded it on trailer went to town came back went to unload it and it would not start was running great turns over good lots of fuel no f1...


Most sports bikes are limited to 300km/h by the manufacturers in an effort to be responsible. Actually the ? was about the 1000 not "most sport bikes". The Suzuki gsxr1000 for 2007 is rev limited to 184 mph. U do the math to figure out kph but in the U.S. who cares about the metric numbers.

Apr 24, 2009 | 2002 Suzuki GSX-R 1000

1 Answer

Can you change temp from F to C on a GSXR 1000 K7


According to the user's manual, press SELECT until you see the odometer screen then hold down both SELECT and ADJUST for at least 3 seconds or more. That should change it. Now, their is another problem that you may not be aware of, and that is if that bike is a Canadian one, it may not change. it is my understanding that the US models and EUROPEAN ones are the only ones that can change. Try this, and if it does not change, you are out of luck.

Nov 25, 2008 | 2007 Suzuki GSX-R 1000

5 Answers

How fast does a Suzuki GSXR 1000 go?


2002 gsxr 1000r started drove up on trailer went to town came back went to unload it and would not start was running great turns over good lots of fuel good battery fuel pump is working no f1 code ???????

Nov 10, 2008 | 2007 Suzuki GSX-R 1000

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...