Question about Motorcycles

Open Question

Still fork lift r70-30 generator problem - Motorcycles

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the fork seals on 95 electraglide


You take the front wheel out then undo the top and bottom yoke pinch bolts,twist the forks downwards then undo the bolt in the centre at the bottom.then lift the dust seal out with a flat screwdriver and lift out the circuits you may need circling pliers.then pull the top and bottom of the fork apart quickly.it will separate.then change the seals and put it back together you need to install the new seal squarely and do not damage it.refill the oil by undoing the bolt at the top and pouring the fork oil in there.

Feb 22, 2015 | Motorcycles

1 Answer

Linde manual


have a check this www.filehippo.com

Aug 09, 2014 | Bruder Linde H30D Fork Lift With

1 Answer

Lifting a engine out of a 256c cat skidloader


check around the rear section and see if there is a way of removing the door/weights. Use a lift bar on another fork lift and chain the motor to that bar . Undo all the bell housing bolts and engine mounts and lift a bit and back the fork lift to get the motor out.

Jun 24, 2014 | Cars & Trucks

1 Answer

How much money should a fork lift cost?


at least $20,000 new. for a less advanced 'electric pallet jack', you may find one for $10,000.

Apr 22, 2013 | Heavy Machinery

1 Answer

Which companies make fork lifts?


There are at least 10 companies, only in the US. you can see them here:
http://stevewong.hubpages.com/hub/Who-makes-forklifts-in-the-USA

Apr 22, 2013 | Heavy Machinery

1 Answer

How far can the forks move from side to side?


the forks can generally move only 6-12 inches from side to side by using the 3rd lever. However, all modern trucks have forks that are easy to manually move. Just lift up the pin that is holding the fork in its groove, and put it in the groove where it will work best for what you're doing. don't forget to lock it again with the same pin

Jan 13, 2013 | Heavy Machinery

1 Answer

How much can you tilt a forklift's forks on average?


It depends on the make and model of the fork truck, but on average you can tilt the forks between 15-30 degrees both up and down

Jan 13, 2013 | Heavy Machinery

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...