Question about kawasaki Z 750 Motorcycles

Open Question

Problems with gear changing on kawasaki z750 2004

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you have to remove the fuel tank of a 2015 Kawasaki Vulcan s to install a gear change indicator


Hi, Richard for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Gear indicator does it work
Gear Position Indicator Kawasaki Vulcan
Owner Manuals Service Manuals Kawasaki Vehicles
OEM Parts for Kawasaki
Kawasaki Vulcan 2015

Mar 22, 2017 | 2015 kawasaki Vulcan S Base

1 Answer

How do I fix my bikes crunchy gear change?


Hi, Royston you may have some internal transmission issues for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.kawasakimotorcycle.org/forum/kawasaki-touring-sport-touring/132454-1993-zr1100-transmission-problem.html
http://motorhead.jactup.com/ZX-11/tech/ZX11_Service_93_01-converted.pdf
OEM Parts for Kawasaki
Owner Manuals Service Manuals Kawasaki Vehicles

Jun 05, 2016 | 1993 kawasaki Zephyr 1100

1 Answer

Got a kawasaki 750 L7F, having trouble engaging some the gears up and down on odd occassions, not had oil change for sometime apparently according to previous owner, do you think an oil & filter c


100% crappy oil.. very common problem.. use specific motorcycle oil NOT NOT NOT car oil and the friction modifiers will kill your clutch

Jul 09, 2014 | 2007 kawasaki Z750

1 Answer

1997 kawasaki ninja zx6r will only select 1st gear


You need to be doing over 10 mph to select anything other than 1st...if it will not change up while riding then I would suspect that the bearings that stop the other gears engaging at low speed are stuck or worn. This system is designed to make it easier to find neutral at a standstill. If you haven't tried to change gear while moving get someone to spin the back wheel as you change up and the problem should go away...

Sep 20, 2012 | kawasaki Motorcycles

1 Answer

Kawasaki vn1500 2nd gear jumping out


Hi, make sure your lever is adjusted to your foot. You can turn the linkage arm adjuster up or down to get a better throw on the lever. If you don't wear boots when riding, this is always a problem on a Kawasaki due to the positive neutral finder. The fist question you get when you call the Kawasaki Hotline is if the rider wears boots or not.
If adjusting the lever doesn't help the problem is internal. Under the gear change cover the items to check would be the pawl that rotates the drum and the detent arm and spring. If the edge of the pawl is worn, it won't move the drum far enough. If the detent arm or spring isn't working, it will want to drop into a false neutral. I've had very good luck by removing all of the parts and polishing them, removing any burrs and replacing the springs. If the problem isn't found under the cover in the gear change area then the only other solution is to pull the motor apart and inspect the tranny itself.

May 15, 2011 | kawasaki Vulcan 1500 Classic Motorcycles

1 Answer

Wer is the neares kawasaki center here in mandaluyong city philippines. i have a problem kawasaki rouser 200cc when the engine is running can not be nutral.is hard to change the gear.


GO TO THE KAWASAKI MAIN REPAIR BRANCH IN MUNTINLUPA, TAKE EAST SERVICE ROAD FROM C5 AND FOLLOW THE ROAD, ITS ON YOUR RIGHT SIDE YOU WONT MISS IT, HAVE IT REPAIRED THRU THEM ONLY!!!!!1

Dec 13, 2010 | kawasaki Mach III H 1A Motorcycles

1 Answer

Kawasaki en 500 c1Im having problems changing up and down gears


The bike has some bent shift forks. Bent shift forks do not move the slider gears properly when changing gears. Expensive to fix.
1ae44e1.gif

Sep 14, 2009 | 2000 kawasaki VN 1500 Vulcan Classic...

1 Answer

Unable to change down gear. gear lever stays down


Well, first of all ofcourse find out how many gears you have, if you take it to a shop and they tell you you have "One down, four up"
It means starting from Neutral, you click down once for first gear, and from there you can click up to fifth.
Try finding an open area, gear up to 3rd or 4th then gear down a couple times.
Remember, you must be in gear 2 or higher to gear down.

Jun 02, 2009 | 2003 kawasaki Z 1000

1 Answer

Kawasaki vn1500 classic 1st gear problem!..


it sounds like you have a broken dog on 1st gear. (on sprocket inside gear box) gearbox needs stripping down and investigating.

Feb 21, 2009 | 2000 kawasaki VN 1500 Vulcan Classic...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...