Question about 1998 Suzuki GSF 600 S Bandit

Open Question

How do i adjust the clutch on a1998 bandit - 1998 Suzuki GSF 600 S Bandit

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have trouble selecting gears on 650 bandit gsf mainly from 3rd to 6 gear changing up, not as bad changing down gears don't go into gear straight away if I change quickly helps somtimes


Hi, Clive and the usual suspects are:
1. Clutch dragging slightly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. A loose shift lever on shifter shaft.
7. Shifter forks sprung.
8. Shifter pawl needs adjusting.
9. Heel/toe shifter coming in contact with the floorboard.
10. Transmission oil too heavy.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bike is sometimes not wanting to shift into neutral
Bandit gear changes
Suzuki GSF650A Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Apr 15, 2017 | Suzuki GSF 600 S Bandit Motorcycles

1 Answer

Clutch is slipping on 80 Suzuki gn 400x


Is it time to re-adjust the length of the clutch cable because it keeps pulling all the time? Is the small spring near the sprocket still there? (this problem happens on gsxF and bandit). Is your mileage so high that the clutch gets tired and the friction elements must be replaced?

Aug 14, 2014 | Motorcycles

1 Answer

How do you adjust the clutch able on a bandit


are you trying to adjust the lever engagement or is the clutch - slipping ( or dragging )
i thought that this bike has a hydraulic clutch - but if it is cable operated - there will be an adjuster at each end of the cable - loosen the locknut and either tighten or loosen as required - there should be some slack at the lever - about 1/8 inch or 5 degrees of travel - re-tighten the locknut

Jan 08, 2013 | 1996 Suzuki GSF 600 S Bandit

1 Answer

1999 bandit 1200 clutch slipping when dropped.


Sounds like its time for some new clutches.You can try to adjust it to where you have a lil slack in the lever,which MAY help,but most llikely its clutch plates time.
Good Luck!

Sep 27, 2012 | Suzuki GSF 1200 Bandit N Motorcycles

1 Answer

'Sticky' gearbox on 2004, 1200 Bandit


Have had the smaller brother of this bike, here is what I found, try using 10W40 full synthetic oil, make sure the clutch is adjusted exactly right, if that doesn't help the engagement dogs are worn and u need an overhaul, which isn't that hard, about 10 hours work and $200 in parts.

Sep 18, 2009 | 2004 Suzuki GSF 1200 Bandit S

1 Answer

Bandit 1200 clutch slipping?


is there no ajustment on it to loosen off a bit it could be worn clutch plates , worn springs, or even wrong oil in box

Jun 05, 2009 | 1991 Suzuki GSF 250 Bandit

1 Answer

91 250 Bandit clutch/gearbox probs?


Keep in mind that a wet clutch requires special oil and adequate free play to make sure the clutch is fully engaged. Chk both. Regular engine oil wreaks havoc on wet clutches. good luck

May 23, 2009 | 1991 Suzuki GSF 250 Bandit

2 Answers

Suzuki gsf 1200 s bandit


Christmas comes early. Go to the site below and you can download a free PDF service manual. Yours is the 1st one in the "Suzuki GSF" section of the list. 4 or 5 below that is a PDF parts diagram with part numbers.

http://www.carlsalter.com/motorcycle-manuals.asp Most manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language.

Top rating due for this answer! Thanks Asel :)

May 08, 2009 | 1997 Suzuki GSF 1200 Bandit S

1 Answer

Gsf 400 bandit clutch needs replacing how do i do it?


Real easy, just drain oil, take off side case and remove the bolts.
Take it off as an assembly.
Make sure clutch plates and friction plates are positioned correctly.

Are you sure you need to replace the clutch?
I assume it merely needs a minor adjustment.

Feb 17, 2009 | 1991 Suzuki GSF 400 Bandit

Not finding what you are looking for?
1998 Suzuki GSF 600 S Bandit Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...