Question about 1994 Yamaha FZR 600

1 Answer

I just bought a pair of led turn signals for my 94 yamaha fzr600r when I installed them the signal lights flash like 4 ways and my dash light for the signals doesnt falsh or come on at all whats the

I had just bought a pair of L.E.D. front turn signals that are intergrated with the mirrors I wired them up right but now my turnsignals flash like 4 way hazards please help

Posted by on

  • 1 more comment 
  • Jason Bortswick
    Jason Bortswick Feb 19, 2012

    no just the front right now my rear brake lights are LED though

  • Jason Bortswick
    Jason Bortswick Feb 19, 2012

    what do I need to do to get them to work

  • Jason Bortswick
    Jason Bortswick Feb 19, 2012

    do I have to buy a flasher that is just for my bike or any one from yamaha because the dont make one for my year bike

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

L.E.D.s use a different flasher rely type. do you have front and rear L.E.D.s

Posted on Feb 19, 2012

  • malcolm peacock Feb 19, 2012

    you need to buy rear turn L.E.D.s as well and wire them all up to a new L.E.D. flasher relay you can buy from yamaha.

  • James Powell
    James Powell Mar 22, 2014

    yes I bought front and rear LEDs I will look for the right flasher relay and see if that helps thank you

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 3500hd front left turn signal won't work


The wire feeding the front left turn signal is likely crimped or stretched and touching the body somewhere. Do you best to trace the left front turnsignal wire back as far as you can - even just jiggling it might give you short term solution (although it will probably come back).
The fast flash of the rear light is because the short up front is letting too much electricity run through the flasher module. This makes it run too fast. Find the short up front, and both problems will be solved.

Apr 22, 2014 | 1994 Chevrolet C/K 3500

1 Answer

How to wire turn signal mirrors on 04 cavalier


Did you get them new? If so, there should be a schematic wiring diagram with them. You could also search the net. Google the model of your mirrors, and perhaps there will be site with the schematics. Normally, if it was me, I'd patch the parking lamp wire into the front marker lights, the tun signal wire right where it says, the turn signals, and the other is a ground which can be grounded to anywhere on the bare metal frame. Use your basic wiring skills. If you don't have any basic wiring skills, do some web research on it. You can solve this yourself, you just need some confidence and a little more knowledge.

Mar 28, 2014 | Cars & Trucks

1 Answer

I HAVE A 1997 HONDA SHADOW 600 FRONT BLINKERS WORK FINE RIGHT REAR WORKS FINE BUT LEFT REAR WILL NOT BLINK LEFT FRONT DOSE BUT FAST I CHANGED BULB IN LEFT REAR DID NOT HELP IS IT A BAD FLASHER


If you have changed the blinkers over to LED lights , you need to put diodes on the wires to stop the fast flash. Honda turn signals Have to grounded to the green ground wires in the harness. You can not ground them to the frame or other wires or the flasher system will not work correctly. Double check that all the wires are connected to the harness correctly (They are color coded). Blue with white band is the same as blue with white stripe. Orange with white band is the same as orange with white stripe. If you have crossed the wires on the front turn signals you may be powering the rear turnsignal with the running light. The running light is the dimmer half of the bulb. The turn signal/flashing light is the brighter side of the bulb. Inspect your wiring carefully.

Mar 18, 2011 | 2004 Honda VT 600 CD Shadow

2 Answers

I have turnsignals problem on 92 buick lasabre limited i replaced flasher, all bulbs are good. if i manually move the turnsignal lever up and down the bulbs will flash also hazard lights work what else can...


When you say you replaced "flasher" I'm guessing you mean the combination turn signal flasher unit. If the hazards "flash" on the 4 way but the turn signal does not you are looking at a turn signal switch type problem. ... If 4way flashers do NOT work you need to check wiring immediately around the flasher unit mounting area.Or change Flasher unit Good Luck.

Apr 11, 2010 | 2000 Buick LeSabre

1 Answer

I have an 1985 oldsomobile cutlass supreme. I am having an electrical problem. When i put the left turnsignal on everylight on the car blinks. (right turn signal,licence plat lights, radio lights, both...


Usually means a bad ground when all lights flash.You can use a cheap ohm meter to check the resistance to ground on the neg. side of your turn signal lamp sockets.You can splice in a wire in your neg. wire and run it to a ground on the body.Well hope this helps and good luck.

Mar 15, 2010 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

Turn signal wire colors right and left


The circuit breaks the ground to work. Both wires go to both signals, the black have two different connections to get back to the signal relay 9different paths). Take your old wires and follow back to see how the were run before.

Jul 15, 2009 | 2003 Harley Davidson FXSTB Night Train

1 Answer

Jeep - right turnsignal won't flash


Probably a bad ground on your front right signal, or a bad bulb. Try switching the right with the left, and see if the problem stays in the same place, or goes with the bulb.

May 18, 2009 | 1993 Jeep Wrangler

1 Answer

2006 Ford Escape - Right side flashers (turnsignals) not working


Check the wires at the connection point and follow them back up to the tail light look for any disconnected wires or grounds. Good luck.

May 14, 2009 | 2006 Ford Escape

1 Answer

I bought a mirror with LED lights. how can i wire them with the exsisting signals?


run the wire on the inside of the instrument panel and splice into existing front turnsignals

Dec 04, 2008 | 2003 Suzuki TL 1000 R

Not finding what you are looking for?
1994 Yamaha FZR 600 Logo

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...