Question about Motorcycles
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
By "changing the front wheel" do you mean how do you remove the wheel from the bike? If so, Start by securing the motorcycle in a upright position and place a jack under the engine with a wood protector between the jack and engine. Raise the motorcycle until the front tire is just touching the ground. Remove both brake calipers then loosen and remove the axle nut. Now remove the axle clamp and slide the axle out of the wheel. Note how the speedometer gear is mounted before pulling the axle. Now raise the motorcycle until the tire assembly will clear the fender. Reassembly is exact reverse of removal with the exception of when you install the axle you will tighten the axle nut before you tighten the axle clamp.
Posted on Nov 20, 2009
the flashing " f i " light on the spedo is the "fuel injection" on-board diagnostic system light, suggestion: check under the seat there is a yellow wire coming out of the ECU that is touhed to chasis ground in order to retreve the trouble codes, the wire may be pinched and contacting ground, causing the light to flash codes.
Posted on Dec 27, 2009
Bad battery, or voltage regulator is bad.smoking is realy bad , loose wires or bad ends on the wires in the charging system could make it loose the charge and cause you to need to jump start it.NEW battery Check charging system for proper voltage.
Posted on Mar 28, 2010
Those are stick coils, just unplug the connector at the top pf the coil and then they just pull out, there is rubber around the coils and sometimes they want to stick in the hole, just give them a pull, you can spay a little window cleaner on them when you put them back in, so they slide eaiser.
Posted on May 02, 2010
Tips for a great answer:
Aug 29, 2017 | 2007 kawasaki Ninja ZX6R
Dec 31, 2016 | 2007 kawasaki Ninja ZX6R
May 01, 2016 | 2007 kawasaki Ninja ZX6R
Aug 28, 2012 | kawasaki Zx600g2 Ninja Zx6r Motorcycle...
Oct 18, 2010 | 2007 kawasaki ZX-6R
Jul 13, 2017 | 2007 kawasaki ZX-6R
Oct 23, 2009 | 2000 kawasaki ZX-6R Ninja
143 people viewed this question
Usually answered in minutes!