Question about 2006 kawasaki KX 450 F

Open Question

Wheres the mixture screw on a 06 kawasaki kx 450f

Posted by on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 200 Answers

SOURCE: what type of oil is needed for it

Hey pal, buy the best oil you can. I use Castrol Syntec Actevo 10-40wt. Buy 3 qts You might not need all 3 but it will come close...and that way u have some for topping off later....don't overfill and check your dipstick while u slowly fill er up...
good Luck to ya friend....Tim

Posted on May 11, 2009

  • 5 Answers

SOURCE: factory fuel air mixture screw settting 88

screw in totally take out 1 to 2 turns

Posted on Sep 15, 2009

  • 3567 Answers

SOURCE: Looking for Air Fuel Mixture

See below. Please rate my answer. thanks.


Posted on Aug 04, 2010

Testimonial: "Many thanks for finding the part number!"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to adjust the carburetor on a 1992 Kawasaki 100

Hi, Brandon for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Idle mixture adjustment air or fuel screw adjustment
How To Carburetor Idle Pilot Screw Adjustment Honda XR70
Kawasaki kx 125 250 Service manual Download service repair owner...

Aug 01, 2016 | kawasaki Motorcycles

1 Answer

Bike has 3.7 hrs will not start is firing no fuel

Many bikes have a valve under the gas tank that shuts off the fuel to the engine. Check to see if someone shut this off. ( long shot answer)

Aug 04, 2014 | 2012 kawasaki KX 450F

1 Answer

I have a 08 kx 450f I went for a ride the other day got down the road and it's stalled tried to kick it over and the kick start was abit stiff then I noticed there was no oil in it... Got it home put oil...

Hi, Anonymous if you were running with no oil I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
No oil in sight glass
Kawasaki kx450f Service Manual
OEM Parts for Kawasaki
Kawasaki kx450f 2015 Owner Manual

Apr 13, 2017 | 2007 kawasaki KX 450F

1 Answer

Which way do the seals go in on a Kawaski 450f water pump

Bes t double check with dealer but in 99% of bikes they go in with the springs facing away from each other - I am assuming you are meaning the oil and water seal that the impeller goes through??

May 26, 2011 | 2006 kawasaki KX 450 F

1 Answer

What kinda gas should I be using in my 2006 Kx 450f

Regular lead free gas (lowest octane, cheapest price) works well. You can put higher octane in once in a while to clean her out a bit.

Feb 27, 2011 | kawasaki KX 450 F Motorcycles

1 Answer

2006 kawasaki 450f, Athena big bore kit. Coolant is getting into my oil. Replaced both seals, oil and water, and replaced the impeller rod. Runs great, exhaust is normal. Radiator fluid drops...

did u find anything out im having the same problem please help?
did u use the gasket that came with the big bor kit???

2006 kx450 owner

Sep 14, 2010 | 2006 kawasaki KX 450 F

1 Answer

2005 kx250f wont idle.will idle fine w/choke on.carb cleaned,new idle jet#41 mixture screw 2-1/8 turns out still no change. pops on deceleration.runs good top end

the fact that it idles with the choke on indicates that fuel mixture is the problem here remove the mixture screw completely check that the o ring seal is not damaged & that the end of the needle is not worn or bent if either of these conditions are obviouse replace the damaged or worn parts general rule of thumb with mixture adjustment is 1&1/2 to 2 turns out give it a try

Feb 13, 2010 | 2004 kawasaki KX 250 F

1 Answer

2003 kawasaki kx 125 shifting

there is a shift pawl mechanism that may be damagedor bent!
make sure the gera lever is tight on the shaft & if it is ok the check inside the side casing for faults
Cheers Rob

Aug 13, 2009 | New Ray Ray 1/12 KX 450F 07 Kawasaki

1 Answer

My 2006 kx450f wont start, the sparkplug is fine but the idle has been cranked around to the point where i dont know where to put it back...any ideas?

check the service manual for info.
you can download it here >>

Jul 29, 2009 | New Ray Ray 1/12 KX 450F 07 Kawasaki

Not finding what you are looking for?
2006 kawasaki KX 450 F Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers


Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides