Question about 2007 Gas Gas Pampera 450

Open Question

On my 07 450 Pampera,Display Panel

Have rejoined yhe white and brown wires, and have no display, only the clock,

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced clock panel turn power on nothing is there a code


If no display---you may have a bad fuse. It should be located behind the control panel. The fuse will look like the old auto glass fuses about 1/4 diameter and 1 1/4 inch long but made out of a ceramic material you can't see through. Color could be white--brown or a gray color. Amp size will be stamped on the end usually 15 or 20 amps.

May 12, 2015 | Kenmore 4888 Elite 30" Built-In Microwave...

1 Answer

I took the wires off the clock/timer to clean the glass because junk got behind it. When I put it all together the clock/timer does not work. It may be that I have two wires crossed. I need a wiring...


I think I worked it out. Black = Neutral. Brown = Live for the two power spades. The four spades for the timer (from the top+ = Red, Orange, Brown then white on the bottom. You will notice that Red and Orange, Brown and White are clipped together. Timer (and oven) is now working perfectly.

Jan 01, 2011 | Ovens

1 Answer

HI, I HAVE A SYLVANIA MODEL SA 170 , I CAN´T SEE THE NUMBERS WHEN I´M IN FROM THE SCREEN, IT´S APPEARS VERY DARKS


If I understand correctly, you have Sylvania 170 timer and the display doesn't light up.
If you have different problem, add a comment.

A) If this is existing installation and timer display worked correctly before, then it sounds like timer malfunctioned or power to timer is interrupted. Check breaker, and then pull out timer and test for power.

B) If this is new installation, then 2 possible things:
1) Timer defective: exchange for new one.
2) Timer not wired correctly.

Review wiring:
Timer replaces single pole switch.
Single pole switch has two wires
Timer has 3 wires: Blue Black White
Timer has additional wire to run internal clock and to light up display.
If timer not wired correctly, then display will not light up.

Here is correct wiring:
a) Two wires from switch.
b) Connect timer-blue wire to one of the switch wires. Choose either one for now. You will have to choose other wire if display doesn't light up.
c) Connect timer-black wire to other switch wire.
d) Timer-white wire does NOT connect to either switch wire. Look in back of electric box. There are white wires twisted together and covered with wire nut. These are neutral wires. Connect timer-white wire to neutral wires. This will power the clock and display.
e) If your box does not have the white wires described in d), then connect timer-white wire to bare ground wire.
f) Turn power ON. Does display light up?
g) If display lights up, switch is wired correctly.
h) If display does not light up, then reverse timer-blue wire and timer-black wire shown in step b) and c).

geno_3245_129.jpg

Dec 02, 2010 | Zip Heaters Sylvania SA170 15 Amp Zip-Set...

1 Answer

Oem Radio installation


*** 91 park ave with delco bose =

black = ground
dark green = lights on input
grey = panel lights
pink = on input
yellow = power input
orange = battery power input

nca = shield ground
tan = left fr spkr +
orange/black = left & right spkr -neg
lite green = right fr spkr +

nca = shield ground
dark blue = right rear spkr +
dark green/yellow = right & left spkr - neg
brown = left rear spkr +

purple/white = display dim output
pink = vehicle speed input
-----------------------------------------------------------------------
**** 91 park ave without delco bose =

purple/white = display dim output
pink = vehicle speed input

grey = left front - neg
tan = left front + pos
dark green = right front - neg
light green = right front + pos

black = ground
dark green = display dim signal
grey = panel lights
pink = power antanna
yellow = ign input
orange = battery power
light blue = right rear - neg
dark blue = right rear + pos
yellow = left rear - neg
brown = left rear + pos .

there YA go

Dec 27, 2008 | 1991 Buick Park Avenue

4 Answers

Frigidaire oven won't work. top range works fine, but digital clock and digital display stopped working which works oven, so oven also will not work


my frigidaire oven will not light. The broiler works and the oven ingiter lights up, but the oven will not ingite. The electronic display does work.

Aug 25, 2008 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Jenn-Air Gas Range SEG196 NO CLOCK/DISPLAY


THE ONLY SOLUTION FOR THE BAD DISPLAY IS TO REPLACE THE CLOCK. I HAVE A JENN AIR OVEN TODAY AS A WORK ORDER TO REPLACE THE CLOCK FOR A FAILED DISPLAY.

FOR THE JGW8130DDB WITH NO POWER ANYWHERE, IT SOUNDS LIKE YOU HAVE A SUPPLY PROBLEM. MAKE SURE THE WIRING IS HOOKED UP WITH THE RED AND WHITE WIRES RECEIVING 240 VOLTS AND THE WHITE WIRE ATTACHED TO NEUTRAL / GROUND.IF THE OVEN HAS A BARE COPPER WIRE AND THE HOUSEHOLD WIRING ONLY HAS THREE WIRES, COMBINE THE WHITE WIRE AND THE COPPER WIRE TOGETHER AND ATTACH TO THE HOUSEHOLD NEUTRAL / GROUND .
UNLESS YOU ARE SURE ABOUT THE HOOKUP IN THE BREAKER/FUSE BOX, DO NOT GO SIMPLY BY THE COLOR OF THE WIRES.

Apr 10, 2008 | Jenn-Air JGW8130A Electric Single Oven

1 Answer

Setting the clock


Wiring harness colors have been fairly standardized for many years. The blue/white lead is the "Amplifier turn-on lead", and can be connected to the remote turn-on lead of an external amplifier. To set the clock, press and hold BAND and DISP to display the clock. Press and hold BAND and DISP until the display flashes. SEARCH left to adjust the hours; right to adjust the minutes. Press BAND to set.

Feb 17, 2007 | Clarion DRB4475

Not finding what you are looking for?
2007 Gas Gas Pampera 450 Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gas Gas Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Kim Halliwell

Level 1 Expert

32 Answers

Livewyre Studio
Livewyre Studio

Level 1 Expert

26 Answers

Are you a Gas Gas Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...