Question about Suzuki Motorcycles
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Any changes you make to the exhaust system will alter the sound the bike produces. The more you cut baffles,and open up the exhaust, the louder it will get. What you do alter to a greater extent,is the state of tune of the motorcycle. Any changes to exhaust or inlet plumbing will require a retune of the engine to suit the modifications. This can be subtle to dramatic. Opening up exhausts can often rob low end power where exhaust port scavaging is relient on some back pressure for maximum effect.
Best to work directly with an engine tuner to do the mods that are known you can get away with, or buy aftermarket prebuilt pipes that have a known previously tested state of tune. Nothing worse than doing something, that then costs money to put back the way it was on finding out it didnt work as well as was hoped.. Hope this has helped you steer your custom mods a little. I can say with certainty, that I have ventured to do what you are doing many times in the past, and it has always cost me more money in tuning and... and well more parts :) Cheers
Posted on Jan 20, 2009
One the left-hand side of the bike (facing forward), there is cover plate just ahead of the drive shaft. Remove that cover (mine has 8mm bolts). The bleeder valve is under this cover. Go to an auto parts store and get a "one man bleeder kit" or if you have some plastic tubing that will fit over the valve, you can use that and a clean jar. Follow the instructions on the bleeder kit, or if you're using the jar and tubing, fill the jar about a quarter of the way with break fluid (use DOT4, but never DOT5!). Take the cover off the master cylinder up at the handlebars, place the tube over the end of the bleed valve (after loosening it a turn or two. Place the other end of the tube down in the break fluid in the jar. Work the clutch lever until you stop getting bubbles in the jar. Be sure to keep the fluid level up in the reservoir. Tighten the bleeder valve, remove the tubing, top off the fluid and replace the covers.
Be careful not to get brake fluid on anything. It will eat paint and mess up other things.
Posted on Feb 13, 2009
Your best bet is to go to a Suzuki shop and get one there. That way you know for sure you have the right battery and that it will fit your bike.
Posted on Mar 26, 2009
Factory recommended plugs are the best. Ask your local dealer, and he will give you the correct plugs. If you are fouling plugs, look for a too rich mixture, or carbs flooding.
Posted on Jun 06, 2009
Tips for a great answer:
Oct 14, 2017 | 1998 Suzuki VS 1400 Intruder
Jul 01, 2017 | 2003 Suzuki VS 1400 Intruder
May 27, 2017 | 1996 Suzuki VS 1400 Intruder
Apr 18, 2017 | 1996 Suzuki VS 1400 Intruder
Apr 03, 2016 | Suzuki VS 1400 Intruder Motorcycles
Mar 02, 2016 | 1998 Suzuki VS 800 Intruder
Jul 02, 2014 | 1994 Suzuki VS 1400 Intruder
Aug 24, 2013 | 1998 Suzuki VS 1400 Intruder
Apr 26, 2010 | 1996 Suzuki VS 1400 Intruder
Jun 20, 2009 | 1998 Suzuki VS 1400 Intruder
Jun 07, 2015 | Suzuki VL 125 Intruder LC Motorcycles
116 people viewed this question
Usually answered in minutes!