2005 Yamaha YZF 600 R thunder cat Logo

Related Topics:

Posted on Feb 16, 2012

My yzf 600 wont move under 3000 rpm - 2005 Yamaha YZF 600 R thunder cat

5 Related Answers

Anonymous

  • 1392 Answers
  • Posted on Jun 10, 2009

SOURCE: yzf 750 wont rev past 4000 rpm

Sounds like you need some plugs and the carbs cleaned and synchronized.

Ad

Anonymous

  • 6 Answers
  • Posted on Jan 01, 2009

SOURCE: Power Loss at around 3000 rpm

are the carbs balanced correctly and are you sure that all of the jets are clean. if not try it, it might work. sluggish throttle response is normally to do with the carbs.

Anonymous

  • 278 Answers
  • Posted on Oct 13, 2009

SOURCE: Speed to RPM ratio?

The Yammy 600 run at high RPM. Also depends on rear tire size

Anonymous

  • 13 Answers
  • Posted on Mar 15, 2010

SOURCE: does a yzf 600 thundercat have an engine

Did you just have you fuel tank off? There a wire connector that needs to be plugged in.

Anonymous

  • 653 Answers
  • Posted on Mar 22, 2010

SOURCE: i have a 2003 yamaha yzf 600 the tach dosent read correct

I do not believe so, as the tach is related to your firing electrical pulse. have you checked the tach wiring for loose connections?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hyundai sante fe 2007 2.2crdi wont rev past 3000 rpm

If your standing still in park it wont rev past 3000 rpm as its got a limiter on it And only revs past 3000 rpm in drive on the move.
0helpful
1answer

2008 yamaha R6 is not standing on idle speed

could be small jet in carb needs cleaning,
0helpful
1answer

I have a 1997 yamaha yzf 600 and it wont go in 1st or 2nd its just stuck in neutral and wont do nothing wats is wrong?

1. How old is the clutch pack, if more than 2 years, have it checked out.
2. Clutch travel or fork may need some adjustment.
Cheers
0helpful
1answer

2001 YZF 600 R thunder cat: Yamaha yzf 600 Thundercat when under heavy load or...

Many YZF 600's have a problem with second or third gear, under heavy accelleration they will jump in and out of gear, the fix is in the gear selectors,an internal box problem.
If it is a clutch problem, ride in top gear at 100kl\hr and give the clutch lever a flick, see if it grabs or slips for a while and then takes up.
1helpful
1answer

I have a 2003 yamaha yzf 600 the tach dosent read correct

I do not believe so, as the tach is related to your firing electrical pulse. have you checked the tach wiring for loose connections?
1helpful
1answer

Speed to RPM ratio?

The Yammy 600 run at high RPM. Also depends on rear tire size
1helpful
1answer

Bike wont start tacho needle points to 3000 rpm

Tachs are coil sensing. Since you have a start problem, chk tach wiring at coil and coil wires.
If all is good, Locate or identify the tach wire and disconnect it. The tach wire should be on the negative side of the coil. If bike starts without tach wire hooked up, Your tack is more than likely the culprit. If bike stll won't run, chk for power to the coil and any possible fuse in ignition circuit. Under the seat I think. Good Luck
0helpful
2answers

Power Loss at around 3000 rpm

are the carbs balanced correctly and are you sure that all of the jets are clean. if not try it, it might work. sluggish throttle response is normally to do with the carbs.
Not finding what you are looking for?

146 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...