Question about 2006 Yamaha YZF-R6

1 Answer

2006 yamaha r6 wont idle when its cold

Changed plugs cleaned k&n filter the bike has yosh slip on and a power commander

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,655 Answers

Hi, Anonymous and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
07 r6 rough idle then stalls on cold start
http://www.r6messagenet.com/forums/r6-maintenance-technical/134582-please-help-2006-r6-cold-start-nightmare.html
2006 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Posted on Sep 26, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cape cod bob
  • 292 Answers

SOURCE: I have a 2004 yamaha r6 and the engine keeps dying

could be fuel starvation. has it been stored for winter, Get Berrymans B12 fuel additive double dose mix in tank, run til hot and let stand overnight, next day should be all good, if you cross your fingers.

go here for free download service manual
http://www.carlsalter.com/motorcycle-manuals.asp

Posted on Apr 04, 2009

  • 200 Answers

SOURCE: new key for yamaha r6 2006

Go to your local locksmith mate. If you have lost your key he will probably want you to remove the ignition switch and bring it in to him...ask first !....Good Luck to you friend....Tim

Posted on May 11, 2009

  • 200 Answers

SOURCE: error code yamaha r6 2007 51 how can i erase it?

could be a safety shutdown by computer, only your dealer can erase the code....and then you'll find out whats wrong...and why the computer doesn't want you starting and damaging the bike.......Good Luck to you friend....Tim

Posted on May 12, 2009

  • 39 Answers

SOURCE: 2006 yamaha r6 yzrf front brake problem

your rotor(s) are bent so when you bleed the brakes everything is good but when your riding the bent rotor is pushing the the caliper pistons back and when you go to brake you have to pump them up take rotors off and inspect them

Posted on May 15, 2009

burgessjay69
  • 78 Answers

SOURCE: r6 2nd gear slipping

if its slipping out of 2nd gear good chance will need gearbox strip and maybe changeing thr selecter fork or drum

Posted on Jun 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi someone tried to Hotwire my bike ran power to somewhere they shouldn't now my imobiliser light has stopped flashing and bike won't start it's cranking but nothing can u help it's a 06 r6


Hi, Michael look at it this way your security system worked but it appears the thief may have fried your security module for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/153806-2006-r6-wont-start.html
http://www.r1-forum.com/forums/2-general-motorcycle-discussions/179669-bike-wont-start-after-power-wash-please-help.html
Yamaha YZF R6 2006 Service Manual
OEM parts for Yamaha
Yamaha 2006 YZF R6V Owner Manual

Feb 21, 2017 | 2006 Yamaha YZF-R6

1 Answer

2008 yamaha R6 is not standing on idle speed


could be small jet in carb needs cleaning,

Feb 18, 2013 | 2008 Yamaha YZF-R6

1 Answer

2006 R6 shuts off during warm up


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Air/fuel mixture screw improperly adjusted.
10. Accelerator pump damaged or not working.
11. Water or dirt in the fuel system, carburetor or filter.
12. Restricted, blocked or kinked fuel line.
13. Fuel tank empty.
14. The gas cap is not venting properly or fuel tank venting system blocked.
15. A failed fuel pump, pressure regulator and or fuel injectors.
16. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
17. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you need please click on the links below. Good luck and have a nice day.
http://www.r6messagenet.com/forums/r6-general/153049-stalling-during-warm-up.html
http://www.r6-forum.com/forums/57-garage-mechanical-help/297282-bike-shuts-off-after-warming-up.html
2006 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Dec 08, 2012 | 2006 Yamaha YZF-R6

1 Answer

Yamaha R6 prone to overheating & throwing out water when engine turn off?


Hi, Roslyn_carri and the usual suspects are:
1. Low coolant level.
2. Restricted radiator air flow.
3. Faulty thermostat.
4. Coolant pump or fans inoperative.
5. Vent hose crimped.
6. Air in the coolant and needs bleeding.
7. Engine idling too long or bike moving too slow.
8. Coolant too old needs to be replaced.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Overheating when turned off Time for coolant change
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/342881-2006-overheating-coolant-overflow-problem.html
2003 2004 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Dec 08, 2012 | 2003 Yamaha YZF-R6

1 Answer

2007 r6 wont start after installing exhaust code 14


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6messagenet.com/forums/r6-maintenance-technical/143249-newbie-my-bike-wont-start-throws-code-14-a-4.html
http://www.r6-forum.com/forums/57-garage-mechanical-help/60783-07-r6-engine-code-14-bike-wont-start.html
2007 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jan 03, 2012 | 2007 Yamaha YZF-R6

1 Answer

My bike will not start without the choke open. i have a gas leak from the air filter line that has a t shaped link one having no end and an overflow bottle at the other end.The bike will not run at a...


Hi, Lromanovich and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Float needle and seat sticking.
5. Float level too low.
6. Carburetor bowl vent line clogged/blocked/pinched.
7. Idle adjusting screw set too low.
8. Air/fuel mixture screw set too lean.
9. Idle port, transfer ports, slow air jet clogged.
10. Slow fuel jet clogged.
11. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/129997-2001-r6-wont-idle.html
http://www.r6messagenet.com/forums/r6-maintenance-technical/135305-cold-starting-problem.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Aug 19, 2011 | 1999 Yamaha YZF-R6

2 Answers

2005 yamaha r6 want start. New plugs,replaced all


go to Autozone but can of Sea foam $10 pour in 1/3 can to 2 gal fuel.. clean fuel filter or just buy a new one, your choice, empty out fuel filter and fill it up with some see foam and if you have trouble getting it started..well push start the damn thing, and if it starts and is running like ****... just do whatever it takes to keep it running and ride an ride hard at times if you have to and see if this stuff will clean out you fuel injector carbs or whatever..it worked with my bike afyer 11 miles. feedback appreciated!

May 06, 2010 | 2000 Yamaha YZF-R6

1 Answer

When i take off in first my bike acts like it wants to stall out like its not getting any fuel. I replaced the air filter and put in a K&N and i changed the plugs. I changed the fuel filter as well and...


was your machine re jetted when you fitted the slip on exhaust system if not this would be a good place to start also does it have an inline fuel filter if so this may need to be cleaned or replaced

Feb 22, 2010 | 2006 Yamaha YZF-R6

1 Answer

R6 hesitation when starting out


Not often i see good questions like this. I would start with riching the carbs a bit. Another possible simple solution is to get your plugs check to make sure they are firing at full capacity, either one can cause the problems you have described. My first guess though would be the carbs, it sounds like the throttle is set a bit off to what it should be at. The fact that your bike runs fine otherwise also suggests this conclusion.

Jun 16, 2009 | 2000 Yamaha YZF-R6

1 Answer

Yam ybr125 wont idle off choke,also cannot find idle control scre


you may need to replace your spark plugs

as the idle should remain constant as long as the tune of the bike is good IE oil changes done regularly / plugs cleaned and or gapped , air filter cleaned or replaced all of these can affect your bike.

hope this helps

Dec 13, 2008 | 2005 Yamaha TT-R 125 LE

Not finding what you are looking for?
2006 Yamaha YZF-R6 Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...