How do i remove rear fender on night rod special
To remove a 2011 VRSCDX rear fender FIRST remove the main fuse under the right side cover first, then remove the tail light open the seat, remove the seat pillion, remove the fasteners and the passenger pillion, remove the electrical caddy and the six fasteners and the washers from the fender, remove the fender from the inner fender by lifting upward and sliding the fender back, remove the inner fender by removing the rear shocks and fasteners.
To install a 2011 VRSCDX rear fender FIRST install the inner fender and fasteners, tighten the fasteners to 95-110 Nm (75-81 ft-lbs), install the rear shocks using shock mount fasteners and tighten the fasteners to 41-68 Nm (31-50 ft-lbs), install the rear fender by sliding it into the slot on the tail lamp panel and aligning the fender with the bolt holes on the inner fender, install the six fender fasteners and tighten them to 4.5-7.5Nm (40-66 in-lbs), install the tail lamp, install the passenger pillion and its fasteners. And tighten them to 20-26 Nm (15-19 ft-lbs), install the main fuse, install the right side cover and ensure that the headlamp, tail lights and stop lamp and turn signals are operating properly.
Jun 04, 2014 |
2011 Harley Davidson VRSCDX Night Rod...