Question about 2003 Suzuki RM 250
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is one supply hose (larger) and a bunch of vent tubes. The vent tubes really don't matter how they are connected as long as they vent. The vents that point vertical - just loop the tube up and then down towards the ground.
Posted on Oct 08, 2009
SOURCE: Gas leake from Air vent
If you mean that fuel runs out of one of the vent lines, note that one of those lines is for overflow from the carb bowl. If this is what is happening, you might have corrosion or dirt making your float needle stick, and overflow fuel to that carb. It needs to be cleaned out by removing the bowl, float and float needle.
Posted on Sep 06, 2010
I don't have a solution but I do have the exact same problem, '03 or '04 (not sure) Suzuki 250 Quadrunner Ozark,really low hrs, left in storage for 2.5 yrs, gas went bad, cleaned it out, now hard to start and won't idle by itself.
I have taken the carb apart and cleaned it out, but did not replace anything, and it will still not start very easily or idle. Before I took the carb apart I thought it was flooding because it would start with the accelerator wide open, but when I would let off, it would die again. Whats going on?? I really don't want to pay to have it fixed.
Posted on Oct 12, 2010
Tips for a great answer:
Sep 23, 2014 | ATVs
Aug 18, 2014 | Suzuki 2009 Ozark 250
Jun 01, 2012 | Polaris ATV
Nov 30, 2010 | 1990 Suzuki Rg 250
Oct 11, 2010 | 2004 Suzuki RM-Z 250
Oct 18, 2009 | Lego Creator Revvin' Riders, Motorcycles...
Sep 10, 2009 | Polaris ATV
Aug 25, 2009 | 1996 Suzuki GSX-R 750 T
264 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: