- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Terrence >>>> 1. Do not go through the gears while idling on a stand!!! The rear tire is not moving at the speed that is normal for 4th or 5th gear..AND if you do get the tire moving that fast.. it is BEYOND DANGEROUS!!
This sounds like the 4th and 5th gears may need replacing.. or the shift drum detent for 5th gear has somehow become ineffective.. If you continue to ride this bike , you may cause more trouble and damage to the transmission.
This would be most likely the first noise of a wearing input shaft bearing. It will only get louder, and eventual failure of the bearing will probably mean catastrophic gearbox failure. It stops when you put your foot on the clutch because the gearbox stops spinning then, and it is quiet in 4th and 5th because there is no side loading (as there is in 1st, 2nd, and 3rd) on the failing bearing. It wouldn't matter what sort of car it was, the gearbox should be overhauled as soon as possible.
Your transmissions need to be service (fluid and filter change) and possibly a TCU replacement. Do NOT go to a dealer. Instead, look on ebay or craigslist for part outs. Transmission control units can be expensive but that is most likely the problem if you already changed ur fluid.