Question about 2010 AJS NAC12 125

1 Answer

My throttle its stuck on full what are the possible causes?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Hello.....Try this.....follow the throttle cable down to the carburetor..Check the spring return for the throttle...Try to close the throttle by hand...If there is no spring..the throttle won't close by itself....If the spring is in place...Your cable may need adjusting or replacing...anyway....to me...it sounds like the spring....check it out and let me know....I hope this was helpful....PEACE....

Posted on Feb 09, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Our 2002 Dodge Durango 4.7 when started goes to full throttle 6000 rpm and has to be immediately shut off.


John, first make sure it is not floor mat or carpet holding gas peddle down causing throttle issue. If all looks good there, would suggest you check throttle cable for being seized, throttle body seized or return spring faulty/broke. You may want to contact a good Tech, have them diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://www.ramforumz.com/showthread.php?t=63227
Throttle body stuck wide open DodgeForum com
How to Repair Stuck Accelerator Pedal DoItYourself com
Sticking gas pedal fix Saturn Series cars and others sticky gas pedal

Aug 08, 2016 | Dodge Cars & Trucks

1 Answer

05 mustang gt codes po 2104 and 2112 replace tcm and tps


P2104 - Throttle Actuator Control (TAC) System - Forced Idle Description: The TAC system is in the failure mode effects management (FMEM) mode of forced idle. Possible Causes:
  • Open or short in multiple accelerator pedal position (APP) sensor circuits.
  • Damaged APP sensor.
  • Damaged powertrain control module (PCM).
Diagnostic Aids: This DTC is an informational DTC and can be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. Application Key On Engine Off Key On Engine Running Continuous Memory All

P2112 - Throttle Actuator Control (TAC) System - Stuck Closed. Description: This powertrain control module (PCM) fault status indicates the throttle plate is at a lower angle than commanded. Possible Causes:
  • Binding throttle body, stuck closed.
  • Damaged PCM.
Diagnostic Aids: Application Key On Engine Off Key On Engine Running Continuous Memory All GO to DV1 Are you familiar with electronic throttle control ? You have a dc electric motor on the throttle body an at the gas pedal there are APP pedal position sensors that send voltage signals to the PCM which in turn controls the electric motor opening an closing the throttle ! By what this P02112 states the throttle plate is binding , which means it could be bad or just needs to be cleaned ! You will need to disconnect the electrical connector an see if it is binding by pushing it with finger or thumb . which is ever easiest !
GO to QE1

Apr 08, 2015 | 2005 Ford Mustang GT

2 Answers

Why is codes p2106 p0401 on?


P2106 THROTTLE ACTUATOR CONTROL SYSTEM,-PO401-EGR INSUFFICIENT FLOW

May 29, 2014 | 2005 Ford Explorer

1 Answer

I have codes 0122 0123 2104 2110 2111 2112 would it be the throttle body


Trouble Code: P0122

Throttle/Pedal Position Sensor A Circuit Low

Possible Causes:


Open ETC TP sensor harness.Short to ground in the ETC TP sensor harness.Damaged TP sensor.SIG RTN circuit open to the TP sensorPCM has failed


Trouble Code: P0123

Throttle/Pedal Position Sensor A Circuit High

Possible Causes:


TP sensor not seated correctly.TP sensor harness is short to voltage.TP sensor harness short to VREF.SIG RTN circuit open to the TP sensor.Damaged TP sensor.PCM has failed.Trouble Code: P2104

Throttle Actuator Control (TAC) System (Forced Idle)

Possible Causes:


Air cleaner and air inlet are not correctly seated.Check for self-test DTCs in all of the vehicle modules.Accelerator Pedal Position (APP) sensor.Throttle Position (TP) sensor.Manifold Absolute Pressure (MAP) sensor.PCM has failed.

Mustang 2006-2008
4.0L V6 VIN N Auto 12

Print


Trouble Code: P2008

Intake Manifold Runner Control (IMRC) Circuit Open (Bank 1)

Possible Causes:


IMRC monitor circuit open


Trouble Code: P2014

Intake Manifold Runner Position Sensor/Switch Circuit (Bank 1)

Possible Causes:


IMRC monitor circuit openMechanical concern - bind, seize, damage or obstruction of IMRC hardware


Trouble Code: P2015

Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1)

Possible Causes:


Mechanical concern - bind, seize, damage, or obstruction of IMRC hardware


Trouble Code: P2019

Intake Manifold Runner Position Sensor/Switch Circuit (Bank 2)

Possible Causes:


IMRC monitor circuit openMechanical concern - bind, seize, damage, or obstruction of IMRC hardware


Trouble Code: P2020

Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 2)

Possible Causes:


Mechanical concern - bind, seize, damage, or obstruction of IMRC hardware


Trouble Code: P2065

Fuel Level Sensor B Circuit

Possible Causes:


Communication link concernDamaged Instrument Panel Cluster (IPC) (MKS)Damaged Instrument Cluster (IC)Damaged PCM


Trouble Code: P2066

Fuel Level Sensor B Circuit Range/Performance

Possible Causes:


Communication link concernDamaged Instrument Panel Cluster (IPC) (MKS)Damaged Instrument Cluster (IC)Damaged PCM


Trouble Code: P2067

Fuel Level Sensor B Circuit Low

Possible Causes:


Communication link concernDamaged Instrument Panel Cluster (IPC) (MKS)Damaged Instrument Cluster (IC)Damaged PCM


Trouble Code: P2068

Fuel Level Sensor B Circuit High

Possible Causes:


Communication link concernDamaged Instrument Panel Cluster (IPC) (MKS)Damaged Instrument Cluster (IC)Damaged PCM


Trouble Code: P2070

Intake Manifold Tuning Valve (IMTV) Stuck Open (Bank 1)

Possible Causes:


IMTV signal circuit shorted to PWR GND or SIG RTNDamaged IMRC actuatorPCM has failed


Trouble Code: P2071

Intake Manifold Tuning Valve (IMTV) Stuck Closed Bank 1

Possible Causes:


IMTV signal circuit shorted to PWR GND or SIG RTNDamaged IMRC actuatorIMTV circuit openPCM has failed


Trouble Code: P2072

Throttle Actuator Control (TAC) System (Ice Breakage)

Possible Causes:


Ice or oil in the intake air system could be the result of a Positive Crankcase Ventilation (PCV) system concern


Trouble Code: P2096

Post Catalyst Fuel Trim System Too Lean (Bank 1)

Possible Causes:


Loose connection, and damaged or corroded terminalsExhaust leaksContaminated HO2S


Trouble Code: P2097

Post Catalyst Fuel Trim System Too Rich (Bank 1)

Possible Causes:


Loose connection, and damaged or corroded terminalsExhaust leaksContaminated HO2S


Trouble Code: P2098

Post Catalyst Fuel Trim System Too Lean (Bank 2)

Possible Causes:


Loose connection, and damaged or corroded terminalsExhaust leaksContaminated HO2S


Trouble Code: P2099

Post Catalyst Fuel Trim System Too Rich (Bank 2)

Possible Causes:


Loose connection, and damaged or corroded terminalsExhaust leaksContaminated HO2S


Trouble Code: P2100

Throttle Actuator Control (TAC) Motor Circuit/Open

Possible Causes:


TAC motor has an open windingTAC motor is damagedTAC motor harness is openTAC motor harness is short to PWRTAC motor harness circuits are short togetherTAC motor harness connector is unplugged


Trouble Code: P2101

Throttle Actuator Control (TAC) Motor Range/Performance

Possible Causes:


TAC motor circuits are cross-wired


Trouble Code: P2104

Throttle Actuator Control (TAC) System (Forced Idle)

Possible Causes:


Air cleaner and air inlet are not correctly seatedCheck for self-test DTCs in all of the vehicle modules.Accelerator Pedal Position (APP) sensorThrottle Position (TP) sensorManifold Absolute Pressure (MAP) sensorPCM has failed


Trouble Code: P2105

Throttle Actuator Control (TAC) System (Forced Engine Shutdown)

Possible Causes:


Air cleaner and air inlet are not correctly seated.Check for self-test DTCs in all of the vehicle modules.Accelerator Pedal Position (APP) sensor.Throttle Position (TP) sensor.Manifold Absolute Pressure (MAP) sensor.PCM has failed.


Trouble Code: P2107

Throttle Actuator Control (TAC) Module Processor

Possible Causes:


TAC motor harness circuit short to ground.TAC motor harness circuit short to voltage.Damaged Electronic Throttle Body (ETB).PCM has failed.


Trouble Code: P2110

Throttle Actuator Control (TAC) System (Forced Limited RPM)

Possible Causes:


Air cleaner and air inlet are not correctly seated.Check for self-test DTCs in all of the vehicle modules.Accelerator Pedal Position (APP) sensor.Throttle Position (TP) sensor.Manifold Absolute Pressure (MAP) sensor.PCM has failed.


Trouble Code: P2111

Throttle Actuator Control (TAC) System (Stuck Open)

Possible Causes:


Binding throttle body, stuck open.TAC motor circuit open.TAC motor circuits are cross-wired.TAC motor harness circuits are shorted together.PCM has failed.


Trouble Code: P2112

Throttle Actuator Control (TAC) System - Stuck Closed

Possible Causes:


Binding throttle body, stuck open.TAC motor circuit open.TAC motor circuits are cross-wired.TAC motor harness circuits are shorted together.PCM has failed.

Oct 26, 2012 | 2006 Ford Mustang

1 Answer

The throttle stuck full open, engine was racing and cooliant was coming out of a over flow tube below radiator. Unable to stop straight away hope engine not damaged, Any advice on cause with throttle, and...


Stuck throttles can be a number of issues, but here are some possible cause:
Cable rusty or frayed..always keep them lubed up
If a slide carb, sometimes residue can cause the slide to stick if been left for a long time.
Incorrect cable routing

If the bike still has good compression and no more leaks after topping up coolant and normal riding then I think you will be OK.

Please leave favorable feedback if this has helped you.
Thank you

Sep 25, 2011 | 2005 Honda CRF 150 F

1 Answer

2005 F150 5.4 Cuts off when driving at constant speed and show "Engine Fail Safe Mode" on display. It will crank back up and run for several hundred miles before doing it again. P2112 Throttle Air...


unfortunately no ! Your best bet take it to the dealer . The P0420 always ends up being the catalytic converter ! P2104 isn't throttle air control . P2112 - Throttle Actuator Control (TAC) System - Stuck Closed. Description: This powertrain control module (PCM) fault status indicates the throttle plate is at a lower angle than commanded. Possible Causes:
  • Binding throttle body, stuck closed.
  • Damaged PCM.
Diagnostic Aids: Application Key On Engine Off Key On Engine Running Continuous Memory All GO to DV1
P2104 - Throttle Actuator Control (TAC) System - Forced Idle Description: The TAC system is in the failure mode effects management (FMEM) mode of forced idle. Possible Causes:
  • Open or short in multiple accelerator pedal position (APP) sensor circuits.
  • Damaged APP sensor.
  • Damaged powertrain control module (PCM).
Diagnostic Aids: This DTC is an informational DTC and can be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to QE1
P0506 - Idle Air Control (IAC) System RPM Lower Than Expected For Vehicles With Electronic Throttle Control (ETC) Description: This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. Possible Causes:
  • Air intake restriction.
  • Exhaust restriction.
  • Engine mechanical fault.
  • Damaged electronic throttle body (ETB).
  • Damaged PCM.
Diagnostic Aids: This DTC is informational only and it may be accompanied by other DTCs. Diagnose other DTCs first. If other DTCs are not present inspect the intake air system for air restrictions and damage. If no concerns are present, clear the DTC and retest. For All Others Description: This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. Possible Causes:
  • IAC circuit open.
  • Air inlet is plugged.
  • B+ or VPWR to IAC solenoid open.
  • Damaged or incorrect IAC valve.
  • IAC valve stuck closed.
  • VPWR to IAC solenoid open.
  • IAC circuit shorted to PWR.
Diagnostic Aids: Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve. Application Key On Engine Off Key On Engine Running Continuous Memory Vehicles With Electronic Throttle Control (ETC) Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. All others GO to KE1

Jul 03, 2017 | 2005 Ford F-150

1 Answer

Throttle cable is stuck an when you turn car on it races to full rpm


you may try replacing the throttle cable for it maybe a little rusty causing it to stuck up. you may also try greasing up the accelerator so it will have a play . hope this helps

Feb 02, 2010 | 1995 GMC Safari

1 Answer

As soon as my 10 hp Briggs & stratton engine starts, it goes to full throttle. I have no control


The engine speed is controlled by a governor and throttle position. There is a spring that holds the throttle (butterfly valve) against the slower position. When the motor is under load' the governor exerts force to open the throttle position. Make sure that all of the components are clean and not binding. Look for a broken or disconnected spring. It is also possible that the governor is stuck in the demand full throttle position.

Sep 11, 2009 | Briggs & Stratton Garden

5 Answers

Engine goes to idle while driving


P2104 Throttle Actuator Control System - Forced Idle
P2106 Throttle Actuator Control System - Forced Limited Power
P2111 Throttle Actuator Control System - Stuck Open
P2112 Throttle Actuator Control System - Stuck Closed
P2135 Throttle/Pedal Position Sensor/Switch “A” /"B" Voltage Correlation
I looked it up and I will give you a web site I got it from http://www.f150online.com/forums/v8-engines/280570-p2104-p2106-p2111-p2112-p2135.html I hope this helps

May 25, 2009 | 2004 Ford Explorer

Not finding what you are looking for?
2010 AJS NAC12 125 Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top AJS Experts

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

terry stevens

Level 3 Expert

991 Answers

Are you an AJS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...