Question about 2002 Honda CR 250 R

1 Answer

How do I get the impeller for the water pump off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 408 Answers

Need to take off the right crankcase cover, hold the pump's gear from inside and unbolt the impeller from the outside.http://www.babbittsonline.com/honda-motorcycle-parts#/Honda/CR250R_A_(02)_MOTORCYCLE%2c_JPN%2c_VIN%23_JH2ME033-2M400001_TO_JH2ME033-2M499999/WATER_PUMP/CR250R-02-JPN-A/2Y14KZ32KZ3AE0400A
The impeller's axle (with the gear) is threaded and the impeller bolts on to it.

Posted on Feb 09, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

MY classic 1976 Austin mini tends to over heat when outside temp is over 35c thermostat replaced with a safari one Radiator good WHY???


Maybe the engine cooling pump not work well?
If use flexible rubber impeller in the pump,check the vanes are leak or broken down?
flexible impeller vans broken-sdny5mf3hz2elzobmxxzydf3-5-0.jpeg


We supply full range raw water pump impellers for outboard and inboard.Our website www.flexible-impeller.com
Normally we can delivery out by FedEx/UPS in 3~5days arrive customer's hand.I hope which can help you:-)

Best regards from Lindong

Jabsco Johnson Sherwood Water Pump Flexible Impellers Outboard Inboard...

Jun 29, 2017 | Mini Cars & Trucks

1 Answer

Ariston li 700


follow the steps and fix it. God bless you

Drain Pump

If the dishwasher is loud during operation, the drain pump might be defective or might have some debris in it. This is a common problem.


5ac563ec-9fe8-4fd3-8ee4-d45fff0f3574.jpg


Circulation Pump

If the dishwasher is loud during operation, and the noise is a continuous drone similar in speed to the circulation pump sound, it's likely that the circulation pump motor bearings have failed. Once this happens the circulation pump will have to be replaced, the bearings are not repairable.





Drain Impeller

If the dishwasher is loud during operation, the drain impeller might be broken, or there might be debris in the pump. Generally, to gain access to the pump the top of the pump housing will have to be removed.





Pump and Motor Assembly

If the dishwasher is loud the motor bearings, drain impeller or wash impeller might have worn out. All three of these components are part of the pump and motor assembly. It may be possible to replace one of the impellers, but the motor bearings cannot be repaired. In that case the pump and motor assembly will need to be replaced.





Wash Impeller

The wash impeller is a small, plastic blade. The motor spins the impeller forcing water through the spray arms to clean the dishes. If one or more blades has broken off of the impeller the dishwasher is loud. The impeller can also scrape against the pump housing if it is damaged, warped or bent.





Circulation and Drain Pump Motor

If the dishwasher is loud during operation, and the noise is a continuous drone similar in speed to the motor sound, it's likely that the circulation and drain pump motor bearings have failed. Once this happens the motor will have to be replaced, the bearings are not repairable.





Water Inlet Valve

The water inlet valve is an electrically controlled water valve. When it is new, the water inlet valve is very quiet. Over time, the diaphragm inside the valve deteriorates and deforms. This deformation interacts with the water rushing in and can cause a loud vibration, buzzing, squealing or other noises. If the dishwasher is loud during the filling cycle, replacing the water inlet valve may solve the problem.

Jul 06, 2013 | Dishwashers

1 Answer

Pool motor problem


If your pump is not moving water you first want to check the skimmer and pump baskets and make sure they are empty as not to restrict water flow. Next make sure your pool filter is clean. Once you have checked these, you may want to check the pump impeller. This is the part in the pump that is connected to the motor that moves the water. Impellers will clog from time to time, especially during the springtime. To inspect the impeller, you will need to open the pump, to see inside of the impeller housing or volute.

May 01, 2013 | Pool & Spa

1 Answer

I have a kitchen aid dishwasher KuDR01TJBLO noisy when draining


see this causes and fix it. God bless you
Drain Pump If the dishwasher is loud during operation, the drain pump might be defective or might have some debris in it. This is a common problem.

Circulation Pump If the dishwasher is loud during operation, and the noise is a continuous drone similar in speed to the circulation pump sound, it's likely that the circulation pump motor bearings have failed. Once this happens the circulation pump will have to be replaced, the bearings are not repairable.

Drain Impeller If the dishwasher is loud during operation, the drain impeller might be broken, or there might be debris in the pump. Generally, to gain access to the pump the top of the pump housing will have to be removed.

Pump and Motor Assembly If the dishwasher is loud the motor bearings, drain impeller or wash impeller might have worn out. All three of these components are part of the pump and motor assembly. It may be possible to replace one of the impellers, but the motor bearings cannot be repaired. In that case the pump and motor assembly will need to be replaced.

Wash Impeller The wash impeller is a small, plastic blade. The motor spins the impeller forcing water through the spray arms to clean the dishes. If one or more blades has broken off of the impeller the dishwasher is loud. The impeller can also scrape against the pump housing if it is damaged, warped or bent.

Circulation and Drain Pump Motor If the dishwasher is loud during operation, and the noise is a continuous drone similar in speed to the motor sound, it's likely that the circulation and drain pump motor bearings have failed. Once this happens the motor will have to be replaced, the bearings are not repairable.

Water Inlet Valve The water inlet valve is an electrically controlled water valve. When it is new, the water inlet valve is very quiet. Over time, the diaphragm inside the valve deteriorates and deforms. This deformation interacts with the water rushing in and can cause a loud vibration, buzzing, squealing or other noises. If the dishwasher is loud during the filling cycle, replacing the water inlet valve may solve the problem.

9_29_2012_12_32_30_pm.gif

Sep 28, 2012 | KitchenAid Dishwashers

1 Answer

What the difference between pressure set-up and free flow set-up water pumps?


Certain in-line water pumps utilize different impellers depending if the pump is designed for a pressurized or a free flow application. If a pump is to be used on a free flow set-up, a smaller motor with a free flow impeller can be used to push as much water as the larger motor with an impeller that handles pressurized systems.

Aug 09, 2012 | Fish

1 Answer

Water pump doesn't work but there is no water leak it can be just a sensor problem?


No, but it could be the impeller inside the water pump, has come loose from the impeller shaft.

A leaking seal indicates that the bearing, or bearings, for the impeller shaft are bad.

I have replaced water pumps, (With a brand new one), and have had to remove it, and reinstall with another one.
Why?
Impeller is spinning around on the impeller shaft. The machining done was a bad job, and the impeller wasn't staked to the impeller shaft.

Aug 04, 2009 | 2002 Jeep Grand Cherokee

1 Answer

On my way to work my tempo overheated and shut down. could this be the thermostat or water pump


check for water flow in the radiator. if the hoses dont expand when you rev the engine, the water pump is probably bad. alot of the factory water pumps have a plastic impeller on them, and the impeller will break in pieces inside the pump housing. if you take the hose off the pump you can see the impeller. napa sells a new one with a aluminum impeller and its a new one, not rebuilt.

Jul 17, 2009 | 1991 Ford Tempo 4 Door

2 Answers

NOISY WHEN DRAINING ON OCCASION


This is a sign of a faulty drain pump impeller. the drive shaft that is connected to the impeller is stripping the impeller. you will eventually need to replace the entire pump soon.

Jun 06, 2009 | Fisher Paykel Eco IWL16

1 Answer

Pump noy pumping water


If it is a FLOTEC pump, 3/4 hp P/N: FP4122 or 1/2hp P/N: FP4112 you can get parts at: 1-800-365-6832, see flotecwater website.

Apr 27, 2009 | Plumbing

1 Answer

Maytag dishwashwer problem


hi try this In most dishwashers, the water pump is located under the lower sprayer arm. This component pumps the water through the dishwasher. The pump has two impellers, top and bottom. These, as well as other components, can become clogged with food or detergent. Here's how to disassemble the pump:
Step 1: Remove the cap that holds the sprayer arm on.
Step 2: Remove the sprayer arm, the screen, the pump housing, a bolt, the upper impeller, the food disposer blade, a spacer plate, the impeller hood, a flat plate, an O-ring, and the lower impeller. Lay the parts out in order as you disassemble them so that you'll be able to reassemble them properly.
Step 3: Clean the parts thoroughly with a mild detergent solution. If any parts are worn, replace them with new ones made for the dishwasher.
Step 4: Replace any seals, such as the O-ring or other washers, with new ones.
Step 5: Reassemble the pump, keeping the parts in order.
To reach the water pump, remove the sprayer arm and screen and then the pump housing. Remove the bolt, and the pump components can be disassembled.
On some dishwashers, the lower impeller serves as a drain pump. This type of system usually has a reversible motor; machines with nonreversible motors have drain valves, as detailed previously. If your machine possesses this impeller pump system, and the water will not drain from the dishwasher, clean the lower pump impeller. This may solve the problem. Otherwise, call a professional service person. 

Sep 12, 2008 | Maytag 24 in. MDB5600A Jetclean II...

Not finding what you are looking for?
2002 Honda CR 250 R Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...