What's your problmy turn signal light and hazard lights went out on my 2007 suzuki forenza fuses are still good em?

you can purchase repair manuals for your vehicle.
Here is link to fuses and relays for free


https://www.autogenius.info/hyundai-elantra-2007-fuse-box-diagram/

canada or USA, (diffr. laws, different wiring, even DRL up there)
station wagon or NOT?
THE TURNS FUSE BLEW OUT. 2nd time, 3rd,,,?????
that means the circuit is overloaded or shorted.! (prevents fire)
but did it blow a 2nd time, why not say so???

all 4 lamps dead. or stuck on, or flash odd. or what? dim?
does the cluster lamp flash, , in blink or emerg. mode?
wont work , means what, (dead or stuck on or dim)?????
do emergency flashers work? ,dead, stuck on what?
does car drive perfect day or night?
are any other things on car dead, of odd acting?
we see all this , 1st 5 min in a shop, zero here.
ive answered Forenza blinks here, many times.
ever search?

ill now answer by guessing USA non stationwagon and no DRL.
dash box fuse 4 kills blinkers

EF1 (engine fuse) 1 good?
dash fuse 14 and EF1 can kills emerg. flasher

so of Emergancy flash lamps blows fuse 14,(smaller of 2)
then the blinkers are in fact shorted.
does it?
if yes, then find out which side blows the fuse 3.
turns left blow or turns right blows.
so if say turns right blows, F4 fuse.
if true ?remove all bulbs front rear right bulbs.
does the fuse hold now,(means not blown)
then buy new lamps there. problem solved
bulbs can in fact short.
not just blow open.
Tell the full story and all this gets easy.
For sure emergency flash,

Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

turns and hazards dead.
check the fuses. first. always for ever and ever all electrics.

the FSM book covers this.
as does alldata.com, (USA cars)
checked fuses yet?
turn/back fuse.
feeds the.:
turnback relay & answer back relay (module)
a digital switch in the lever (combo) it just sends ground logic
level to the module.
so sound to me to be
one light is shorted. (or trailer wire hacks) "visual inspections!,"
or the module is bad.
if both sides are bad, seems bad module to me,
if all lights blink fully bright on hazard the lights should be good.

the module is just under the steering wheel , under those
plastic covers, the books shows simple access. to the combo
my book dont show module location
i use a rubber hose to my ear to find any relay, clicks.
if you find hazard click , (assuming it does) then same place
is the turn sigs.
its not in the fuse box, cab , i looked.


hope that helps.

alldata.com
has it.

if your hazard lights stay on, you may have a problem with the hazard switch on your stearing collum. try moving it back & forth several times, eg. on, off, on, off always ending @ off & see if that works. they do get sticky @ times. your brake lights will work but your turn signals won't work properly with the hazard switch turned on. let me know if problem persists & will see if i can help you more. good luck.

There is a way to reset all computer memory on most cars. First disconnect the negative terminal on the battery and then the positive. Touch both together and hold the for approximately 30 seconds. This resets all PROM memory on the vehicle. If it is like most vehicles then you drive it down the road for a few miles and the first 4 TPMS sensors it sees it will learn as the cars. NOTE: this may or may not work, it is just a suggestion. Will not work if there are problems with any of the TPMS components. This is only a reset with all 4 sensors working.

first check all fuses with a test light
it still could be the switch or a wiring issue

You should probably start by changing the bulbs. No... they didn't both burn out at once. You might have driven a month with only one, and didn't notice untill the second one went. Just check in the socket with a test light. If you have power, you should have lights. If you don't have power, your switch isn't as good as you thought, or you checked the wrong fuse.

Your Hazard fuse is blown.
Hazard fuse has the instrument gauges on it in addition to the turn and brake lights.

When one of my brake lights went on my 07 Caravan it when short for a time and took out this fuse.