Question about 2008 Derbi Cross city
I think it is the fuses
Posted by Anonymous on
Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
why doesn my motorcycle power on
Chinese Scooter Club View topic No power at all
Derbi Cross City 125 2008
Derbi Boulevard 125 150 200 Factory Service Repair Manual Download Manuals...
Posted on Mar 03, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
looks like you have a nut at the rear of thr swing arm, one on each side, these are the rear wheel/chain adjusters. slacken the wheel nut and then adjust the nuts, there should be some kind of markings on the swingarm so you can get both sides the same. when done tighten the wheel nut and you are done
Posted on Mar 26, 2009
You can get new wheels on ebay, or at your local motorcycle dealer, and it does not have to be the exact same tyre, but it does have to be the same hight, i would reccomend bridgestone tyres as they last a hell of a lot longer than the stock, well worth your money
Posted on Aug 01, 2010
Tips for a great answer:
May 27, 2017 | Derbi Motorcycles
Apr 14, 2017 | Derbi Cross city Motorcycles
Dec 30, 2016 | 2008 Derbi Cross City 125
Dec 30, 2016 | Derbi Motorcycles
Feb 11, 2016 | 2011 Derbi Cross City 125
Aug 30, 2012 | 2011 Derbi Cross City 125
Aug 02, 2012 | 2010 Derbi Cross City 125
Jul 15, 2012 | 2007 Derbi Cross City 125
Jun 21, 2012 | 2008 Derbi Cross City 125
Sep 09, 2011 | 2010 Derbi Senda Baja 125 SM
Oct 19, 2017 | Derbi Motorcycles
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: