Question about kawasaki KLX 250 Motorcycles

Open Question

How much fork oil goes in a 03 klx 125

What is the fork oil amount for a 03 klx 125 L

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: level of oil in front forks

not sure about newer models but the old models take 280 ml in each fork

Posted on Nov 10, 2008

Ad
fastboyz
  • 674 Answers

SOURCE: KX 125 (2003) motorcycle

its 120 mm or 4.7 inches from the top of the fork
Some measure the oil quantity and fill the fork up, some fill the fork up and measure the oil level. The most correct method is to measure the level, I guess, but many guys measure in quantity.. both ways work well.
1dcced6.jpg

Posted on Nov 28, 2008

  • 3567 Answers

SOURCE: type of oil for a klx 125 dirtbike

The gearbox gets 10w40 motor oil.

Please rate this answer. Thanks afiala93!

Posted on Apr 05, 2009

  • 9 Answers

SOURCE: how much fork oil goes in my aprilia rs 125 1998

front fork oil capacity is 430cc

Posted on Aug 02, 2009

hawk127311
  • 350 Answers

SOURCE: how much 5w oil goes into each fork?

Using 5w oil with stock springs, your oil level should be about 100mm from the top with the fork fully compressed, damper rod pushed all the way down, and the spring out. I hope this helps and good luck. Please vote and leave a message.

Posted on Oct 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 03 Kawasaki klx 125 that is blowing oil out the exhaust pipe and smokes bad


either too much 2 stroke oil in fuel or piston ring, make sure you glaze bust the barrel if you buy new ring worn out put new in., think just 2.

Oct 26, 2017 | kawasaki Motorcycles

1 Answer

Standard amount of fork oil for Honda xrm 125, what is best 2t or fork oil, my front fork is so bumpy


The fork oil does not have anything to do with the kind of engine do you have, 2t or 4t. Doesn't matter.
You need to replace the fork oil, you need to know the year of the fork. means, you need to know if it's a bladder or non bladder fork.
oil height of the bladder fork is approx. 70mm, non bladder forks run about 100mm oil level.
oil amount is about 530-600cc per leg

Dec 11, 2014 | 2014 Honda CRF 125F

1 Answer

Whats the correct amount of fork oil per leg in cc yamaha tw 125 2002 thanks


Front fork leg oil level (from the top of the inner tube, with the inner tube fully compressed and without the fork spring) 135 mm

Sep 29, 2014 | Yamaha Motorcycles

1 Answer

Fork oil capacity rieju smx 125


Rieju's Official Manual recommends on PAIOLI telescopic fork with 36mm diameter bars 265 c.c. CASTROL of SAE 15W per bar.

But for road use only I think that SAE 10W (265cc fork oil amount)per bar would be quite acceptable.

Jan 12, 2013 | 2008 Rieju SMX 125 it

1 Answer

2003 CR 125 R: how much oil do the forks take?...


you will have to check your owners manual or shop service manual, each model has a specific weight and amount used in each fork,there is no one measured amount for all motorcycles.
The question you should ask is how much fork oil does my ( yr,,make,model ) take>

May 03, 2010 | Motorcycles

1 Answer

What is the fork oil amount for a 2002 klx 300 per fork tube


The owners manual says to do the following if you don't want to remove the forks:
*raise the front wheel
*remove the fender, meter cable & unit, headlight, handle bar, fork protectors
*loosen the fork upper clamp bolts
*remove the caps from the top of the fork tube
*fully compress the fork tube so the dust cover touches the bottom and place a stand to hold it
*remove the springs
*set the oil level 68mm (standard) or 60 - 90 mm (adjustable) from the top of the tube

It may be easier to remove the tubes and you could replace the leaky seal at the same time. I did this recently and put in new springs too. It was my first time working on forks. With help from TT members and the service manual it was fairly easy. I didn't buy an oil gauge, seal driver, or spring holder. I used a ruler to measure the oil and a medicine dropper to remove any excess. For a seal driver I used a piece of PVC pipe cut in half then secured around the lower tube to drive the seal. Try a search on replacing fork seals for more info. 5w oil is standard but i have heard that 7 works well Good luck.

Dec 20, 2009 | 2002 kawasaki KLX 300 R

1 Answer

Fork oil capacity


medium fork oil - 150 mls in each leg

Nov 01, 2009 | 2005 Yamaha Ybr 125

1 Answer

Type of oil for a klx 125 dirtbike


The gearbox gets 10w40 motor oil.

Please rate this answer. Thanks afiala93!

Apr 05, 2009 | 2005 kawasaki KLX 125

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

77186 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...