Question about Honda Motorcycles

1 Answer

Where are the timing marks on a 2002 xr70r

How to find timing marks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 408 Answers

Remove your left crankcase cover and reveal the stator's rotor.Also remove the camshaft's cover on the left of the cylinder's head.On the stator's rotor there is a T mark next to a carved straight line. You rotate the flywheel until that line faces straight forward (there should be a mark on the crankcase there to align with)Then insert the camshaft to the cylinder head with it's lobes facing the crankshaft and they don't press against the rocker arms.Then fit the camshaft's sprocket on to the camshaft so that a dot mark that it has, faces towards the front wheel (again there is a mark casted on the cylinder head). At that point you should rotate the camshaft a bit not too much) so that the bolt holes of it matchs those on the sprocket.

Posted on Feb 07, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Timing marks on 2002 acura 3.5rl

i need a diagram of the timing marks on a 2003 acura 3.5rl

Jun 01, 2013 | Cars & Trucks

1 Answer

Timing marks on a 2002 f150 4.2 engine

Timing marks on fly wheel . Get someone to help you; crawl under front of truck have helper bump the starter with the ignition key and watch for the timing marks on the flywheel.

Mar 10, 2013 | 2002 Ford F150 Regular Cab

1 Answer

Need to know timing and where timing marks need to be putting new timing belt and crank sensor in a 2002 kia optima 4 cylender engine

you shoud aligin from mark opn the timig gear and mark on the crank(ther is a bolted port on the exhoust side.)

Jul 23, 2010 | 2002 Kia Optima

1 Answer

How the timing mark will be on a 2002 intrepid 3.5

crankshaft at TDC, align comshaft sprocket timing mark between marks on rear timing belt cover

Jun 18, 2010 | 2002 Dodge Intrepid

1 Answer

I repair the motor of my mazda mpv 2002 and it doent started

You need timimg marks, There are the internal marks for installing timing chain, you follow the marks on the crank and cam and line them up, for the Ignition timing you follow the marks on the crankshaft harmonic balance, and the marks on the timimg chain cover for top dead center ect..

Feb 07, 2010 | 2002 Mazda MPV

1 Answer

I need to know the timing marks for a 2002 toyota camry

timing marks are on the cam( a line ) and crank pulley. bottom pulley's mark(ridge) is harder to see, use a light and you will see a ridge in between the teeth. after u spot it use a white out and mark it. so it's easier to check ur mark when u put on the belt.

Apr 18, 2009 | 2002 Toyota Camry

1 Answer

Isuzu trooper 2002 RLV engine. camshaft timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Feb 21, 2009 | 2002 Isuzu Trooper

1 Answer

Timing Belt Markings

Mark are on the crank and cam timing gears. Cam gear mark at 12 o"clock crank gear mark lined up with TGC mark on block when installing timing belt.

Dec 16, 2008 | Hyundai Motor 2002 Elantra

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

76691 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides