I have a 1995 BMW gs 1100 and need to know how much oil the front forks use thanks

SOURCE: i have replaced fork seals

Hi,
I am assuming the old oil is drained.
Once the tops are opened, lift the bike onto the center stand which will make the forks extend. Refill through the top of the fork with 12 oz of fork oil. The manual states that you must use oil with a weight of approximately SAE 3, and the amount going in needs to be equal in each fork.
Hope this helps

SOURCE: Ohlins spring Inserts, Front Forks - BMW F800GS

you are right in the removal and replacement of the springs, my tip so you dont have to change the oil is when you are removing the springs nip your fingers on 1 section of the spring and turn the spring in your fingers like you are unscrewing a bolt.any oil loss will be neglible. oil is 270mls per leg if you want to change it.

SOURCE: small amount of oil leaking from front left fork

first of all you have to chechk the fork if the fork is duplicate then you have to change the fork.OR if your fork is new then also you have to change the fork

SOURCE: Hello all. Does the BMW K1 front brake master

you need to remove the twist grip cover then disconnect the throttle cable unscrew the singel clamp screw and take off the switch cluster then the master sylinder can be taken off the handelbars,,,
its a work up for an easy job? its what you could call over engineered! good luck my friend

Testimonial: "Hello and thanks miket756. Yes, big job ahead with a sleeving of the master cylinder. Many thanks, GS"

SOURCE: looking for a manual for BMW 1994 1100 GS - can

you could try posting on UKGSER thats where I got a url from for mine.