Hi, i have a diesel bullet (greaves 5hp engine) can i fix a horn and all electrical parts without a battery???? (using engine output power)..... some one ans me...am not a electrical mechanical guy..... i try to restore my grandpa's bulls at home..... tnx in advance!

you would really have to check with the dealer or see if there is a place for one. some come with a starter upgrade and some dont

dead battery faulty transfer [ if you have one ] failed starter - bad connections

Fault handling:
1. Check the main output circuit of generator to prevent the short circuit at the output end from causing the excitation can not be established;
2. Click the excitation Magnetizing button with the excitation Magnetizing button.
3. Without excitation buttons, magnetized with battery

Click to get more diesel generator set information
Generator Diesel Generator Cummins Generator Volvo Generator Perkins...

Increase the speed for constand power output, or check the load it maybe more than the genset can power.

diesel engine of diesel bullet is made for stationary engine at early, it does not governs accelarator as ramp.
most of engine rebuilders repairs as is, but it need some special setting for low and high throttle.
after all, most of diesel bullet engine needs to reassamble with power..

Dude I also owned diesel bullet recently pls mail me about nd how to ..

as the bike got only few electrical parts . the only suggestion is to carry on with the same electrical wiring as on electra .it will workout , i have done it with my redditch 1971 model it looks cool

This is just a guess but it may have powered headlights or other lights on the train at one time, some of then even had a smoke producing device on them.

It definitely sounds like the electrical part of your ignition isn't working properly.When you turn the key, the lck and tumbler turns on the ign. switch in which sends power to the rest of the car.