Https://docs.google.com/open?id=0B68_zXPsRU2kSmlGcGJ3MFRneU0
download manual from web site above
I agree with Francisco...the torque range should be similar between the two bikes
Hi, you may use those specs for your byke
Only recente engines use Car type screws with permanent strech and crazy torques
good luck
Yes, It will work for you. But after you have run it for a day or 2 check them again.
Also months after check them again. Note do not over tighten cause it will warp the head and/or crack it. Good luck.
Hello
I show the head torque setting to be 24-26 ft pounds. Tighten them down in three stages in an "X" pattern.
Help need torque spec for cylinder head bolts 1986 honda civic dx 1.5 pls...
654 views
Usually answered in minutes!
×