Chicago 46935 armature i need 1 - Electric Demolition Jackhammer

Hello, Frankie -

Apparently, Chicago Electric is a trademark of Harbor Freight which is owned by Central Purchasing, LLC. Sources of information:
https://www.usaweld.com/Trademarks-s/100.htm
and
https://www.bloomberg.com/research/stocks/private/snapshot.asp?privcapId=116569411

Therefore, I suggest you contact Harbor Freight Customer Service directly and ask about the availability of the replacement armature springs you need for your Chicago Electric saw, model 62382.

This is the link to the Harbor Freight Contact Us web page:
http://www.harborfreight.com/customer-service-contact-us.html
If you scroll down that page, eventually you will see a left sidebar listing a telephone number for Technical Product Support.

Best wishes.

if YOU HAVE OLD ARMITURE YOU COULD GET REPAIRED OR REWOUND BY MOTOR REPAIR SHOP PRONTO ELECTRIC DOES THIS THEY ARE IN CHICAGO IL. ON NORTH SIDE

problem power switch
brushes worn
problem armature
circuit breaker for power point

wouldnt be surprized if its pressed together as if theres plenty of oil in there,they dont normally need stripping right down

Contact Harbor Freight Tools for parts. You can also have your armature rebuilt thru Eurton Electric in California. They do a good job on the Brute armature so most likely do same for yours. Turn around time usually couple of weeks. Good luck

If you have a newer of current tool you can go to CP.COM.
If it's an older tool try this link:
Chicago Pneumatic Service Repair Parts OEM Pro Am Tools

If change brushes it has having its workinghours Use a service kit for your model if there is support for your hammer ??? on EBAY there is a set brushes parts are maybe hard to find for electrical demolition hammer of this brand.
Carbon Brushes Chicago electric UL breaker jack hammer NEW 46935 harbor...

Chicago model #96035 is the same W/ different attachments, use this model when ordering from Harbor Freight. Total cost will set you back about $40.00