At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My bike turns on when choke cable is engage and 5 minutes of warming disengaging the choke cable the bike shuts off.. Its a 1993 suzuki bandit gsf 400..
Re: My bike turns on when choke cable is engage and 5...
You may have a vacuum leak. Your carbs may just need be adjusted and synced. I would not be surprised if the carbs have been out of sync since day one.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, bike not running off of choke is an indication that the pilot circuit in the carbs is plugged.. the choke is a enriching circuit hence why it runs only with the choke on. When turned off the bike starves for fuel and dies. My guess is the bike has sat for longer than 4 months and the pilot jets are plugged from varnish... they will need to be removed and properly cleaned.
are you trying to adjust the lever engagement or is the clutch - slipping ( or dragging ) i thought that this bike has a hydraulic clutch - but if it is cable operated - there will be an adjuster at each end of the cable - loosen the locknut and either tighten or loosen as required - there should be some slack at the lever - about 1/8 inch or 5 degrees of travel - re-tighten the locknut
The carburetor choke circuit is probably plugged up. Remove the carbs and thoroughly clean them making sure that the choke orifice are especially opened.
any bike cam timing to piston position dipend -1) crborater side air in and exust side air out to more information to you go youtube.com more video to bike ripairing to help your bike repairing more ditals contact your problum email [email protected]
Check that the clutch is in, kick stand up, and neutral light ablaze. Then try your start button. When you had it running and hit the button, the starter engaged at a slower speed then the bike engine was turning, which led to the stall. The stall means your starter works. If the starter works when the engine is running then it is wiring. Check your kick stand wiring along with the clutch wires which plug in on the handlle bar or where the clutch cable enters the engine.
×